IM LOOKING FOR THAT
>SMALL BLOCK CHEVY SOUND AND PLAN TO INSTALL NITROUS IN THE FUTURE. I LIKE
>KERKER BUT DOES THAT MEAN NO CENTER STAND?
Kurt, I have the Kerker 4 into 1 on my 90' and it definately has the small
block Chevy sound. It's awsome! Turns heads where ever it goes. There's a
sound wave on my web page. CLick on the link in my sig. line below.
You will lose the center stand but the sound of this pipe is definately with
it. I plan on buying a lift when it's time to change the tires.
As far as rejetting goes,,, I'm not sure if mine was so I can't help ya
there. Bought it with the exhaust already installed. I do know that the
mixture was richened (brass plugs on the carbs removed and the color of the
plugs looks good).
You could put the exhaust on yourself,,, drill out the brass plugs on the
carbs to gain access to the mixture screws and richen the mixture by turning
the screw counter clock wise 1/4 turn at a time and then checking the color
of the plugs.
Btw,,, the correct procedure to check the plugs is to get on the highway,
find a spot where you could safely hit the kill switch while you're on the
throttle and at highway speed, coast to the side of the road and pull the
plugs. Checking them after the bike is just idling gives you a false
reading.
Ride safe
Drew VROC 793(R) - VMOA 1058
Moonachie, NJ
90' V-Max http://drew.mrcool.org
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
