|
Super Tyler, thanks a heap for your (and to all
those who responded!!) help. I'll keep you posted.
Dave
----- Original Message -----
Sent: Thursday, March 16, 2000 5:18
PM
Subject: Re: Fuel Sending unit, MSD light
takes bath.
As you found out the MSD S light is not waterproof and the board is not
sealed or coated,as TC said contact cleaner and a toothbrush a scrub the board
on both sides, the let it dry out for a few days, the try again if it flashes
it check circuit your ok. now before reassembling go down to a electronics
supply store a buy a can of Conformal coating (spray can) and spray both sides
let cure and board will be waterproof also drill a couple of small holes
in the case for drainage, also clean and spray LED board, next option is to
delete LED board and use a light instead and relocate the circuit board
elsewhere which is what I did. if interested on how to do it ,let me
know.
Tyler Pennock,VMOA # 380 Eastern-Canada Director 1987vmax
1260 Ottawa,ON,Canada < [EMAIL PROTECTED]>
|
