Nick,
I went through that when I installed the solid
mounts. Like Tyler said previously,install the rear
tubes and leave them real loose. I put the center bolt
under the bike on the mufflers in loose, then stuck
the front tubes into the mufflers,leaving them off the
front cylinders,after sliding them in,attach them to
the exhaust studs on the front of the block. I had to
use a screwdriver and lightly tap the connections
together under the bike.Once they are in all the
way,then tighten the muffler/exhaust tube conections
first,then tighten up exhaust studs.
Its easier with 2 people,no doubt also. I even had
difficulty removing the exhaust a second time to
install a Hindle.
Mike
> > I have a cobra exhaust on my 99 Max, and wanted to
> put the stock exhaust
> > back on just to see how much more hp I could get
> out of him.... I am
> > having trouble lining the stock exhaust back up
> the way it was supposed
> > to be.. it seems that if i get one side on, the
> other falls off... its
> > been pretty frustrating. Wanted to know if there
> was a "trick" in
> > putting the stock exhaust back on... . thanx
> >
> > Nick Harris
> > VMOA #976
> >
> > .............................................
> > To unsubscribe go to
> http://www.sayegh.org/unsubscribe.htm
> > .............................................
>
>
>
> .............................................
> To unsubscribe go to
> http://www.sayegh.org/unsubscribe.htm
> .............................................
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
