on 4/6/00 8:52 AM, Kamp, Steven at [EMAIL PROTECTED] wrote:
> I am going to be installing front and rear EBC HH pads and want to know if
> there is any prep that I need to do to the rotors or anything else? It is a
> 95 with 6100 miles. I need to change the pads b/c I got fork oil on the
> front pads when doing my fork rebuild and also want more stopping power.
> The brake fluid was just flushed 800 miles ago. Can I just pull the caliper
> and install the pads and be on my way or is there other things that need to
> be done? Thanks in advance!
>
> Steve
> 95 V-Max
> VOMA # 1111
>
> ..............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> ..............................................
>
Breaking the glaze on the rotors is a good thing. I like to use Scotchbrite
paint remover pads, since they seem to cut better than sandpaper. Make sure
you clean liberally with brake cleaner to remove all the residue (and fork
oil).
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
