Carlos Carvalho wrote:
> Dear Paul,
>
> I did a lot of things. Let me tell you:
>
> Fist of all, i've installed the Racetech emulators.
> After this, i did the furbur fix, i bought a steering damper kit, i've
> lowered the forks about 1/2 inch, i changed the bearings but the front still
> shaking.
> Now, i'm thinking about changing the front config.
> That's why i need the best numbers to put on it (how much oil, which one,
> how much air pressure, etc)
> i will be very happy if you help me.
> Thanks and best regards.
> Carlos
Check the following......first
1. check wheel balance, it's critical
2. check for loose wheel bearing. You should feel NO MOVEMENT in the front end
3. check tire runout. Does the tire or rim wobble when you spin it? New tires
should run very true and without imperfections. Did it start after a tire
change?
I truly suspect one of the above.
===================================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
===================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
