Thanks TC (and Tyler and Kevin)

OK..found the exploded diagram at
http://216.37.204.3/Yamaha_mc/Yam_mc.asp?show_frames=94VMX12FTA+94VMX12FE10+
94VMX12FE10.GIF that helps. I'll look again see if I can see it in the
manual.

Now...the Stack/PDQ people say use any sending unit from a bike or auto
(suggested a Suz. Bandit) that runs a graduated gauge. Man, are those
sending units universal in size and shape or application? How do I know the
dang thing is gonna fit?


Dave B.

----- Original Message -----
From: "TC" <[EMAIL PROTECTED]>
To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
Sent: Wednesday, May 03, 2000 3:33 PM
Subject: Re: How to change the fuel sending unit


> Dave, Dave, Dave ...
> There is a good picture of this assembly at HSLM ...
> http://www.hlsm1.com/ ... go to this site and look at their microfiche
> for the '94 or '96 VMAX ... I have not had it out .. but it appears
> that it is located forward of the tank drain bolt at the bottom ... It
> has two bolts itself and drops right out with a gasket. There is a
> connector with a green and black wire connected to it. There is also a
> "fair" picture of this in the rear of the manual ..... look around
> page 8-30 (cable routing) ... at the bottom ... I swear this unit
> looks like a variable resistance unit .. the HLSM picture almost looks
> like it has a float on it .. but it just can't be true .. as we only
> get a on-off indication .. .hmmmmmmm. There are two 6mm screws holding
> this thing in .... go take 'em out !! You don't have to drain the tank
> but ...
> campbell
>
> ----- Original Message -----
> From: "david brilliandt" <[EMAIL PROTECTED]>
> Subject: How to change the fuel sending unit
>
>
> > Is there a diagram, schematic, instruction etc. for replacing the
> fuel
> > sending unit
> > snip ,
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................

.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................

Reply via email to