Tobin,
Hang on ... I will scan and send you a wiring diagram. Your biggest
problem here is going to be with the pickup coils. Your '86 motor has
4 and the '91 only has one. To make matters worse .... the flywheels
and ignitors are different ... they are specific to the pickup coil
arrangement you are going to use, (except the wiring sockets are the
same on the ignitors .. the new one simply does not use all the
leads). Sooooooooo ... hang on here .. let me think about this
............. I assume you want to continue to use the ignitor that
was already in the '91 right ?? What have you done, (if anything),
about hooking up the pickup coil wires, (the '91 wiring harness only
had an orange and black lead in it). What did you do when you found
that these didn't match up ??
campbell
----- Original Message -----
From: "tobin Marti" <[EMAIL PROTECTED]>
Subject: Engine turns over but doesn't start
> I recently replaced my V max 1991 japanese motor
> with a full power (hardly used ) canadian motor
> snip <
> The problem seems to be that the connections
> in the wiring harness from the 86 don't match
> my 1991.
> snip <
> I can't find and English version wiring
> diagram of the 1991 model over here(okinawa)
> snip <
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
