Paul; Tell me more. Is there a standard size pipe that presses in or
does it have to be milled. Cheers.
Paul Sayegh wrote:
>
> TC wrote:
>
> > Don,
> > I find it hard to believe the "big" tube can be twisted like that even
> > with them being that thin ..
>
> I can assure you that it goes egg shape simply by torquing the swingarm
> bearings because I measured it. 4.5 lbs torque caused a .010" egg shape in the
> driveshaft tube. Think what happens when you ride two-up and hit a bump in a
> turn. A .125 thick tube pressed inside and welded cures that problem.
>
> ===================================================
> Paul Sayegh
> V-Max Technical List Administrator
> VMOA Northwest Director
> V-Max web page http://www.sayegh.org/tips.htm
> ===================================================
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
--
Patrick Ahearn
VMOA #570
86 CLYMAX
Sarasota, Florida
My V-max Home Page
http://home.earthlink.net/~patahearn
This is where I work
http://msnhomepages.talkcity.com/ClassifiedsCt/floridacars/floridacars.html
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
