Hey Scott
Is that a Shift light that you have next to your SPA tach ? What do you set it to for
Shifting ? Is is really effective and what did you pay for that ?
Thanks Colo Phil
[EMAIL PROTECTED] wrote:
> To install my spa tach I mounted mine into the factory white internal housing by
>modifing it with a hack saw.
>
> 1- After removing the stock unit from the bike remove the chrome housing then the
>bracket mark the white housing so you know which is the top)
> 2- Next you need to remove the chrome bezel which is the hardest part of this
>installation. I used a flat screwdriver and carefully pryed it off a little at a
>time. Key word is carefully. The neater you are the better it will look when
>finished. Pry it just enough to get the white housing out.
> 3- Take the old speedo out and slide the spa tach into the white housing. You will
>need to remove 2 sections of the housing for the tach to slide all the way in.
> 4- you also have to cut the front lip of the white housing to compensate for the
>thickness of the new tach face.
> 5- I drilled the white housing for 1 of the studs on the new tach,and bolted the new
>tach to the white housing(make sure the tach is straight and the housing is right
>side up). This is only for assembly to hold it together. The bezel will hold it all
>together tight.
> 6- Carefully re-roll the bezel back over the modified white housing and tach (make
>sure the white housing is right side up and the tach is straight)I simply used a
>screwdriver and pushed the bezel lip back over the housing.
> 7- Reinstall the bracket, wiring harness and chrome outer housing. I drilled 2
>holes in the back of the chrome housing and screwed it to the white internal housing.
> 8- Bolt it back on the bike.
> 9- You can see a pic of a bracket I made to mount the new speedo sensor to the front
>wheel.
>
> to see these pics go to the website listed and type in vmax as your guest password.
>Then click on spa album
>
> good luck
> scott mellor #870
>
> To get there, simply click the address below and enter your guest password: vmax
>
> http://www.photoisland.com/servlet/GuestLogin?USERNAME=kselec
>
> If that doesn't work, go to www.photoisland.com, and log in to my albums with the
>following information:
>
> Log-in ID: kselec
> Guest Password: vmax
>
> _________________________________________________________________
> See you @ PhotoIsland!
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
