Phil,
At Lewistown Raceway, Lewistown, MT the track is 4100' elevation and the
typical weather conditions (barometric pressure, humidity, etc.) usually
made for about a 6000' days. With a stock motor except for Hindle 4-1,
Stage-1 jetting, K&N filter,airbox Y removed and dial-a-jet installed; a 6"
slick on an 18" wheel (shaft driven) and wheelie bars I was running
consistant 11.18 @ 122+ MPH in the 1/4 mile. At Dakota Raceway, Minot, ND
(1100' elevation) I ran the 1/8 mile in 7.00 flat at 100 MPH ! Obviously I
was running out of horsepower on the big end of the 1/4 mile track. That
bike is now back on the street where it belongs and I've just about
completed an '86 Max drag bike: chromoly frame, 74" wheelbase,10" prostock
slick, 1260 c.i. motor with Falicon crank, Venolia pistons, Carillo rods,
Fuegle blower injected with methanol... it should take care of that lack of
horsepower on the second 1/8th mile. I've been watching with interest your
runs at Denver. When you get that monster sorted out it is going to kick
ass!! I hope to get there and race next year. I will, by the way, be
attending the Mile High Nationals next month (spectator), might I see any
of you there?
Dave Galusha
VMOA #1177
----- Original Message -----
From: phil <[EMAIL PROTECTED]>
To: V-MAX TECH LIST <[EMAIL PROTECTED]>
Sent: Monday, June 19, 2000 2:09 PM
Subject: Re: [Vmax] Plug Caps
> Hey Dave What do you run in terms of times ?
>
> Phil
>
> Dave Galusha wrote:
>
> > I've been running Accel wires on NGK plugs for 8 years, even at the
strip!
> > I certainly did not see a degradation in performance and it hasn't
appeared
> > to damage anything.
> >
> > Dave Galusha
> > Promax Racing
> > VMOA #1177
> >
> > > Sean; Now my brain hurts! I put $15 ACCEL plug wires on stock NGK
plugs. I
> > > trimmed the length and screwed them into the coils. I used the spark
plug
> > > boots that came with the wires, Now I'm confused. Are you saying that
I
> > need
> > > a special cap like the stock ones? What are the NGK 5ohm Caps? Where
do
> > you
> > > get them? Why are they used? My setup seems to work perfect but is it
> > > possibly damaging?
> > >
> > > Patrick Ahearn
> > > VMOA # 570
> >
> > .............................................
> > To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> > .............................................
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
>
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
