Hey Dave,
I won't be racing at Mile Hi nationals. I will run this saturday in Pueblo and
I might even get a low 10 second 1/4 who knows ? I will by virtue of being
registered get a free ticket to THursday night(at Mile Hi Nationals) so I will
go then for sure.
So I have never heard of a quick supercharged vmax. I think Dennis B. in the NE
has a quick one but all the ones I have seen are slow. I heard that the reason
why was because you needed methanol to make them go. So it sounds like you are
on the right track.
You are welcome to call me when you get into town and we could do dinner or
something .... Take care Phil
Dave Galusha wrote:
> Phil,
>
> At Lewistown Raceway, Lewistown, MT the track is 4100' elevation and the
> typical weather conditions (barometric pressure, humidity, etc.) usually
> made for about a 6000' days. With a stock motor except for Hindle 4-1,
> Stage-1 jetting, K&N filter,airbox Y removed and dial-a-jet installed; a 6"
> slick on an 18" wheel (shaft driven) and wheelie bars I was running
> consistant 11.18 @ 122+ MPH in the 1/4 mile. At Dakota Raceway, Minot, ND
> (1100' elevation) I ran the 1/8 mile in 7.00 flat at 100 MPH ! Obviously I
> was running out of horsepower on the big end of the 1/4 mile track. That
> bike is now back on the street where it belongs and I've just about
> completed an '86 Max drag bike: chromoly frame, 74" wheelbase,10" prostock
> slick, 1260 c.i. motor with Falicon crank, Venolia pistons, Carillo rods,
> Fuegle blower injected with methanol... it should take care of that lack of
> horsepower on the second 1/8th mile. I've been watching with interest your
> runs at Denver. When you get that monster sorted out it is going to kick
> ass!! I hope to get there and race next year. I will, by the way, be
> attending the Mile High Nationals next month (spectator), might I see any
> of you there?
>
> Dave Galusha
> VMOA #1177
>
> ----- Original Message -----
> From: phil <[EMAIL PROTECTED]>
> To: V-MAX TECH LIST <[EMAIL PROTECTED]>
> Sent: Monday, June 19, 2000 2:09 PM
> Subject: Re: [Vmax] Plug Caps
>
> > Hey Dave What do you run in terms of times ?
> >
> > Phil
> >
> > Dave Galusha wrote:
> >
> > > I've been running Accel wires on NGK plugs for 8 years, even at the
> strip!
> > > I certainly did not see a degradation in performance and it hasn't
> appeared
> > > to damage anything.
> > >
> > > Dave Galusha
> > > Promax Racing
> > > VMOA #1177
> > >
> > > > Sean; Now my brain hurts! I put $15 ACCEL plug wires on stock NGK
> plugs. I
> > > > trimmed the length and screwed them into the coils. I used the spark
> plug
> > > > boots that came with the wires, Now I'm confused. Are you saying that
> I
> > > need
> > > > a special cap like the stock ones? What are the NGK 5ohm Caps? Where
> do
> > > you
> > > > get them? Why are they used? My setup seems to work perfect but is it
> > > > possibly damaging?
> > > >
> > > > Patrick Ahearn
> > > > VMOA # 570
> > >
> > > .............................................
> > > To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> > > .............................................
> >
> > .............................................
> > To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> > .............................................
> >
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
