Gary Triplett wrote:
> Does anyone know where one can obtain the PINs used in Jim Riordan's
> solution to installing V-Max Saddle Bags?
> http://www.sayegh.org/saddle1.htm I am unable to locate a supplier
> for the PINs.The PINs used in Riordan's writeup are available from
> Hartwell/Lockwell in minimum lots of 25. Since Riodan's Saddle Bag
> solution requires 2 each of 3 pins one would have to purchase 75 pins
> from Hartwell/Lockwell. Obviously, I don't want to do that.The PINs
> required are Hartwell/Lockwell #'s LG5CB-875 , LG5CB-1125 &
> LG5CB-1250.It was suggested that I get the PINs from McMaster-Carr. I
> talked to McMaster-Carr on the phone and I sent them an email. In both
> cases they were unable to cross reference the Hartwell/Lockwell #s.
> Since the PIN sizes are not mentioned by Riordan in the Saddle Bag
> solution, I don't know the sizes of the PINs. Does anyone know where I
> can obtain the PINs?Gary Triplett #1245
The alternative pins system shown at http://www.sayegh.org/saddle1.htm
was purchased from McMaster Carr. They do not cross over to a Hartwell
# The good part is that the pin heads can be grabbed to pull out where
the Hartwell/Lockwell pins are difficult to grab
--
===================================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
BMW web page http://www.sayegh.org/bmw.htm
===================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
