What are the sizes or part numbers of the McMaster-Carr pins?
----- Original Message ----- 
From: "Paul Sayegh" <[EMAIL PROTECTED]>
To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
Sent: Wednesday, July 12, 2000 4:42 PM
Subject: Re: Saddle Bag installation


> Gary Triplett wrote:
> 
> > Does anyone know where one can obtain the PINs used in Jim Riordan's
> > solution to installing V-Max Saddle Bags?
> > http://www.sayegh.org/saddle1.htm I am unable to  locate a supplier
> > for the PINs.The PINs used in Riordan's writeup are available from
> > Hartwell/Lockwell in minimum lots of 25. Since Riodan's Saddle Bag
> > solution requires 2 each of 3 pins one would have to purchase 75 pins
> > from Hartwell/Lockwell. Obviously, I don't want to do that.The PINs
> > required are Hartwell/Lockwell #'s LG5CB-875 , LG5CB-1125 &
> > LG5CB-1250.It was suggested that I get the PINs from McMaster-Carr. I
> > talked to McMaster-Carr on the phone and I sent them an email. In both
> > cases they were unable to cross reference the Hartwell/Lockwell #s.
> > Since the PIN sizes are not mentioned by Riordan in the Saddle Bag
> > solution, I don't know the sizes of the PINs. Does anyone know where I
> > can obtain the PINs?Gary Triplett #1245
> 
> The alternative pins system shown at http://www.sayegh.org/saddle1.htm
> was purchased from McMaster Carr.  They do not cross over to a Hartwell
> #  The good part is that the pin heads can be grabbed to pull out where
> the  Hartwell/Lockwell pins are difficult to grab
> --
> 
> ===================================================
> Paul Sayegh
> V-Max Technical List Administrator
> VMOA Northwest Director
> V-Max web page http://www.sayegh.org/tips.htm
> BMW web page http://www.sayegh.org/bmw.htm
> ===================================================
> 
> 
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................

.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................

Reply via email to