----- Original Message -----
From: "donald smith" <[EMAIL PROTECTED]>
> Anders, if you don't ride hard, you should have gotten the .90 springs.
Maybe you're right, it feels a bit stiff but basically ok and it's too much
trouble to change the springs now, I live in Sweden
> The emulators still need to be set and the oil to 19oz. Thats why its
> important to get the right rate springs. You don't vary pre load when
> you have the right spring. You say the sag is like stock? That right
> there tells you the preload is wong.
Maybe I just explain badly. What i meant was that with 26mm preload the
front was too high when sitting on the bike. The bike steered badly and I
would have had to rise the forks through the triple clamps to get back to
"normal". With 16mm preload, the front is about the same level as stock.
Maybe with softer springs this would have been different. But RaceTech
actually recommended 1.0 before I chose .95 on tech list recommendations.
What difference should I expect to feel from adding the extra 2 oz of oil?
If I'm not experiencing any "mushyness", even during heavy braking, and the
suspension feels at bit on the stiff side, what would be the benefit of an
extra turn on the emulators. Won't that make them even stiffer?
/anders w.
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
