Kraig and gang,
I found a great series of webpages from a fellow Vmaxer - Barry.
For carb tuning instructions check out:
http://www.angelfire.com/ia2/vmax/carbtune.htm
Mercury sticks and the carbtune directions will be the same.
The previous owner of my bike thought the sync screws were the idle adj....
Yuck.
Dusty
VMOA #1305 - '97 Platinum
http://www.netace.com/vmax
Tampa, Florida
-----------------------------
Date: Wed, 06 Sep 2000 08:09:28 EDT
From: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Subject: sync carbs how to?
Message-ID: <[EMAIL PROTECTED]>
OK, got my mercury sync meter in today. I can figure out how to set up the
guage but
1)where to the carbs does it attach,
2)and what screw do I turn to adjust the draw?
Also some had mentioned to blow out the jets from the top of the carbs. My
air box is off.
3)Where do I place the air nossle to blow out these jets. I am looking down
the throat of my carbs now.
Thanks
Kraig
VMOA 1328
The "P-51" Long Range Max
------------------------------
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
