Brian,
Chances are that you have "Bal" stabilizer jacks. Camping World carries
those jacks and should be able to get a crank handle for you. Both my A/S
and my Avion had/have Bal jacks that use that style of crank.
<<Jim>>
<<http://www.oldengine.org/members/jdunmyer>>
<<[EMAIL PROTECTED]>>
<<lower SE Michigan, USA>>
<<mailto:[EMAIL PROTECTED]>>
-----Original Message-----
From: brian ganoe <[EMAIL PROTECTED]>
To: Multiple recipients of VACList <[EMAIL PROTECTED]>
Date: Monday, November 20, 2000 6:11 PM
Subject: [VAC] Leveling Jack Crank
>
>Hi All,
>
>Just finished installing the 3100 Olympian catalytic heater. I picked up
>gas behind the frig and mounted the heater on the flat surface beside the
>frig. It runs nice(no power needed) but does not throw out alot of heat. My
>next quest is the hand crank the runs the leveling jacks up and down. It is
>a 3/4 inch hex stud that runs each jack. This item was not with our 1973
>23' Safari when we rescued it last summer. Do folks just use a tire iron or
>is there a proper tool that I need to get? If so, any insight as to
>acquiring it would be appreciated. Thanks!
>
>Brian
>73 Safari
>
>
>
>
>
>
>To unsubscribe or to change to a daily Digest, please go to
>http://www.airstream.net/vaclist/listoffice.html
>
>If replying back to this message, please delete all the unnecessary
original
>text from your reply.
>
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
