I purchased an extra plug like the one installed on the back of the
Sub. The one with the plastic dual purpose lock and plug door.
I filled the back of it with silicone sealer and mounted it on the front of
the A/S.
When not in use, the trailer connector is stored plugged into this dummy
plug.
Dean
Dean Sale
A Defender of Liberty and Advocate
of Freedom for Texas and Texians
Let's Live as Texans, Free Again
One of the Broaddus Six
----- Original Message -----
From: Dr. Gerald N. Johnson, electrical engineer <[EMAIL PROTECTED]>
To: Multiple recipients of VACList <[EMAIL PROTECTED]>
Sent: Wednesday, December 13, 2000 11:35 AM
Subject: [VAC] Re: Trailer connector
> You might replace all the wiring set screws with brass screws from the
> hardware store. Then spoon in some silicone dielectric grease (such as
> Ford part number F8AZ-19G208AA) to keep water away. I'm using that in my
> lights and connections and in the working side of the plug to keep
> surfaces from corroding. I also enclose the plug in a hitch ball cover
> and hang it to keep water from running into the cover (e.g. cover up) to
> cut down on the water. I wish for a cover that fits tighter.
>
> Gerald J.
>
>
>
> To unsubscribe or to change to a daily Digest, please go to
> http://www.airstream.net/vaclist/listoffice.html
>
> If replying back to this message, please delete all the unnecessary
original
> text from your reply.
>
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
