RJ:
Wouldn't that be a "rule of fingers," then?
:)
Dan Weeks
> From: RJ Dial <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> Date: 02 Mar 01 10:20:20 -0800
> To: Multiple recipients of VACList <[EMAIL PROTECTED]>
> Subject: [VAC] Re: Room for Radials
>
> Reply to: RE: [VAC] Room for Radials
> Each situation is unique, and it is always best to put the responsibility of
> tie sizing on the dealer. In other words, if they don't fit, the dealer is on
> the hook to find ones that do.
>
> Best bet is to go in knowing all you can in order to make the choices that
> have to be made.
> If unsure where to start, use what is recommended in your manual. If trailer
> is too old for a manual, then start with what's on the trailer now or ask a
> tire dealer what will fit ("the choices").
>
> A good rule of thumb is that if you don't have 2 fingers of clearance all
> around, then stick with bias ply.
>
> RJ
>
> Snowabode wrote:
>> What is "enough room for radials" in terms of inches, in the wheel wells? I
>> >need new tires, too.
>>
>> Charles L.
>> Central Ohio
>> 1974 27' Overlander International
>> WBCCI 3048 VAC
>> [EMAIL PROTECTED]
>> http://members.aol.com/snowabode/airstream.jpg
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
