Harvey,
I think that one of the keys to my installation is that short line with
the Male fitting on one end, Female on the other; both are swivel
fittings. This allows easy orientation of the 'Tee'.
FWIW: my 'Tee' fitting is brass.
<<Jim>>
Harvey Barlow wrote:
>
> Jim,
>
> Just as I transmitted my second message on the subject and returned to the
> e-mail screen, I found your reply. Thanks for the information. I will go
> to NAPA today and inquire about a 10mm, 10mm, 3/16" Tee fitting. I guess if
> brass is all that is offered, I better heed the warnings and pass on it.
> Tuna's discussion regarding using brass explains why the warning against
> using brass should be followed.
>
--
<<http://www.oldengine.org/members/jdunmyer>>
<<[EMAIL PROTECTED]>>
<<lower SE Michigan, USA>>
<<mailto:[EMAIL PROTECTED]>>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
