My current setup is DHCP, eth0 is Nat and eth1 is Bridge. The DHCP address which get's assigned is pingable from my host machine, from other developers machines, but not from our dev boxes, which are on different subnets.
If I boot the machine up via VirtualHost and disable the Nat before bootup in the config, it all works fine. On Tuesday, May 20, 2014 4:42:49 PM UTC-4, Alvaro Miranda Aguilera wrote: > > What I recall is, if you network have dhcp, you public network / bridge > will get an IP and you will be able to use that ip to access from other > network > > eth0 will be nat > eth1 will be this bridged network. > > however, if you use public network / bridge for a fixed ip, then you need > to check if the gateway can be set from vagrant, if I remember correctly at > some point wasnt avaliable, and the option was left to do it on the guest > side (say start up script rc.local, etc) > > http://docs.vagrantup.com/v2/networking/public_network.html > > Setup a bridge. > > Let me know if you have questions around this. > > Alvaro > > > On Wed, May 21, 2014 at 4:08 AM, synack <[email protected] > <javascript:>>wrote: > >> So in otherwords, vagrant isn't going to work correctly, or is there >> something else I can do to get my dev box, which is on a different subnet, >> to be able to connect/see the vagrant box? >> >> On Thursday, May 15, 2014 7:39:44 PM UTC-4, Alvaro Miranda Aguilera wrote: >>> >>> Vagrant requires the first network to be nat, and connect over a forward >>> port to setup the vm. >>> >>> So you have a chicken egg, with no nat on eth0, vagrant can't connect to >>> the guest to setup the 2nd nic. >>> >>> Without the nat, vagrant will be able to only turn the guest on, and >>> shutdown force. >>> >>> Alvaro >>> >>> >>> On Fri, May 16, 2014 at 3:13 AM, synack <[email protected]> wrote: >>> >>>> Hi All >>>> >>>> I'm trying to get a Bridge only setup going, no NAT. I've posted my >>>> question on superuser, but I thought I would post the link here for a bit >>>> more exposure as I'm really struggling to get this right. >>>> >>>> http://superuser.com/questions/752954/need-to-do- >>>> bridged-adapter-only-in-vagrant-no-nat/753563?noredirect=1#753563 >>>> >>>> Thanks for any help >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Vagrant" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "Vagrant" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "Vagrant" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
