Hi Mark,
The primary purpose of a Zone in this situation is to create an area of the map
where the primary Hex Grid does not apply. Is the name of your Zone 'Main'?
If you want to create a 'transparent' zone that still uses the map grid, but
the zone name can be referenced in property filters using $CurrentZone$, then
in your Zone definition for Zone 'Main', click the 'Use boards Grid' setting on
and change the 'Location Format' from $name$ to $gridLocation$ using the insert
drop-down menu.
The actual setting of the Grid Location format is in the 'Location Format'
field in the Grid Numbering. Default is $gridLocation$, but can be changed to
include the board name or anything else if required.
Hope this helps,
Regards,
Brent.
>*********** REPLY SEPARATOR ***********
>
>On 8/02/2006 at 6:53 AM Mark Wardell wrote:
>
>Hey, I've got a map with a multi-zone grid where I have defined a hex
>grid, and added hex numbering. So far so good, and you've all had a
>chance to read my tails of woe getting the hex grid to align with the
>hexes on the map.
>
>Now to my question, when it reports moves made in this zone it does not
>report the hex number. I thought it would. It is reporting a move was
>made, but it just reports "* 56 Sqn moves Main -> Main *"
>
>Am I missing something here?
>
>Thanks
>
>~Mark
____________________________________________________________
Brent Easton
Analyst/Programmer
University of Western Sydney
Email: [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/vassalengine/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
