Aha, That rings a bell. Have fallen for this before.
What is happening is that you where getting a piece that was not actually going into the Deck, but onto the board at a location at almost the same place, due to turning of snapping. The mechanics of the Deck drawing then means you cannot select that piece because it is conceptually 'under' the Deck, even if the Deck is empty! Regards, Brent. >*********** REPLY SEPARATOR *********** > >On 4/10/2007 at 5:23 PM Tim McCaron wrote: >Dave, > >I took another look at this. > >On the protos White / Black I turned off the 'ignore grid' check mark in >the >Does not stack trait. After that placing multiple cards in the discard pile >and resending them back to reshuffle would empty the discard pile >completely > >_____ > >From: [email protected] [mailto:[EMAIL PROTECTED] On >Behalf Of David Neumann >Sent: Thursday, October 04, 2007 11:32 AM >To: [email protected] >Subject: RE: [vassalengine] Problem with Discard Deck > >Hi all, > >I haven't received any feedback on this issue, and have tried everything >and cannot figure it out myself... > >Not sure if it is a bug or not. > >Basically, I have a deck and a discard deck. When I take cards from the >deck and play them on the playing surface and then move them to the >discard pile (either manually or via a right-click menu option) they get >'stuck'. That is, they seem to form a stack in the discard deck that I >cannot move, affect, reshuffle, etc. > >This only happens when multiple cards are in the discard pile. That is, >if the discard pile is empty and I place 1 card in the discard deck, I >can remove it just fine. If I discard one card and then another, >however, first card in there gets 'stuck' like I mentioned above. > >Weird thing is, the card cannot be moved at all...if I take a different >game piece (not a card from the deck) and place it in the discard deck >and remove it, the cards that were stuck become unstuck and move off the >discard deck... > >Very strange. > >Again, if anyone has a few minutes to take a look at the module (or >knows what might be the problem), I'd be happy to e-mail it to them >(about 8Mb). > >Thanks, > >Dave > >________________________________ > >From: vassalengine@ <mailto:vassalengine%40yahoogroups.com> yahoogroups.com >[mailto:vassalengine@ <mailto:vassalengine%40yahoogroups.com> >yahoogroups.com] >On Behalf Of David Neumann >Sent: Tuesday, October 02, 2007 11:01 AM >To: vassalengine@ <mailto:vassalengine%40yahoogroups.com> yahoogroups.com >Subject: [vassalengine] Problem with Discard Deck > >Hi all, > >I've had this problem before and never gotten it sorted out, and now >it's popping up in a new module that I'm making. > >Basically, when I play cards on the table, then select to discard them >(I use Return to Deck, and have the discard deck selected) they go to >the discard deck, but then the bottom card becomes 'stuck' in the >discard deck and cannot be removed or reshuffled. > >If anyone has any time to take a look at my module and deduce what is >going wrong, please let me know and I will e-mail the module to you >(it is about 8Mb). > >Thank you, > >Dave Neumann >neumann2706@ <mailto:neumann2706%40gmail.com> gmail.com ><mailto:neumann2706%40gmail.com> > >[Non-text portions of this message have been removed] > >[Non-text portions of this message have been removed] > > > ____________________________________________________________ Brent Easton Analyst/Programmer University of Western Sydney Email: [EMAIL PROTECTED]
