On Thursday 01 March 2007, ML wrote: > On 01/03/2007 05:55, Alexey Eremenko wrote: > > The only problem is that bridging works to outside world, but not > > between Host and Guest. > > > > Can someone help me out with this ? > > I have set up full networking between guest and host and between the guest > and the outside world. > I have a linux host and winXP guest and this is how I set up networking: > > on the host > > modprobe tun > tunctl -t tap0 -u <your_user> > ifconfig tap0 10.0.2.2 netmask 255.255.255.0 > iptables -t nat -A POSTROUTING -s 10.0.2.0/24 -o eth0 -j SNAT --to > <your.IP> chmod 666 /dev/net/tun > > > then in virtualbox I use "host interface" and tap0 as interface name and in > the guest I configure manually the network adapter (I use 10.0.2.15 netmask > 255.255.255.0, default gateway 10.0.2.2), add your dns and you're set! > > It works like a charm for me: I can connect to the internet from the guest > and I can also connect between the host and the guest using samba. > Trying this. I have no fixed IP so tihs can be problematic but set to current one.
I can ping 10.0.0.2 from host. Attempt to access from guest does register as tap0 traffic but fails. I have no DNS server on board. How to I add my DNS? Hosts? _______________________________________________ vbox-users mailing list [email protected] http://vbox.innotek.de/mailman/listinfo/vbox-users
