Arrgh...

I am running Opensuse 10.2 with vbox 1.4 and trying to set up virtual host
networking.

I have the bridge set up and working with a private ip address of
10.16.1.10and I created vbox0 but can't get an ip address in my
guests.  I followed
the documentation section for opensuse (checked many times).

eth1 is active, eth0 is not used.

Here is ifconfig output.
br1       Link encap:Ethernet  HWaddr 00:E0:81:5F:6D:D7
          inet addr:10.16.1.10  Bcast:10.16.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:81ff:fe5f:6dd7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8960 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7173 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7370383 (7.0 Mb)  TX bytes:1365200 (1.3 Mb)

eth0      Link encap:Ethernet  HWaddr 00:E0:81:5F:6D:D6
          inet addr:10.16.3.10  Bcast:10.16.3.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:58

eth1      Link encap:Ethernet  HWaddr 00:E0:81:5F:6D:D7
          inet6 addr: fe80::2e0:81ff:fe5f:6dd7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8975 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7143 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7501389 (7.1 Mb)  TX bytes:1362266 (1.2 Mb)
          Interrupt:233

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3152 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3152 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:669835 (654.1 Kb)  TX bytes:669835 (654.1 Kb)

-----------brctl show --------------
# brctl show
bridge name     bridge id               STP enabled     interfaces
br1             8000.00e0815f6dd7       no              eth1           vbox0

I ran
sudo VBoxAddIF vbox0 myuser br1

and added vbox0 under "interface name"

Ultimately, I want a host with a private IP and each of my VMs to have there
own unique private IP addresses


Thanks, John
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users

Reply via email to