On Fri, May 8, 2009 at 15:50, Johannes Kastl <[email protected]> wrote: > Hi there, > > I wanted to try the Windows7-RC, so I created a new machine on my > openSUSE 11.1, where I installed VB 2.2.2-ose from the openSUSE build > service. > > I selected the SATA-Controller, and tried to boot. Got an error. Back to > IDE => no error. > > Activated the SATA again, this time not putting the harddisk on it, > instead setting it as IDE Master. But again, as soon as the SATA > controller is enabled, I get an error saying: > >> Die virtuelle Maschine Brutus_Windows_7 konnte nicht gestartet werden. > > ("The virtual Machine Brutus_Windows_7 could not be started") > >> Unknown error creating VM (VERR_PDM_DEVICE_NOT_FOUND). >> >> >> Fehlercode: >> NS_ERROR_FAILURE (0x80004005) >> Komponente: >> Console >> Interface: >> IConsole {9511bc54-15ee-4ddf-808e-472aba03809c} > > I googled the error message, and found > http://78.46.147.154/viewtopic.php?f=10&t=16554 > > which say "SATA is not supported in OSE (thou it appears as a option in > the menu listing...)". Is that so? That would be a pain in the ass, > especially as it is not nice to still have it as an menu option... >
Unfortunately, this is so: SATA is not supported in OSE but is there. Disable it and all should be fine. You can also try using SCSI to see if it works. Cheers _______________________________________________ vbox-users mailing list [email protected] http://vbox.innotek.de/mailman/listinfo/vbox-users
