Okay.
If I go to SQL-land and delete the record for that host from the
'computers' table, will that be enough to remove it from the system or are
there other areas of the DB I need to clean out as well?
(Sorry if that's a dumb question, but I've found other areas where just
removing a record doesn't remove all traces of the record, like the list
of virtual machines assigned to a hypervisor, so I figured I should
check before I start deleting things.)
Thanks all.
-m
On Wed, Jun 20, 2012 at 10:16:04AM -0400, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Michael,
>
> Unfortunately, yes, in 2.2.1, you can only set MAC addresses via the add
> multiple computers page. You'll need to set them in the database. This is
> fixed in 2.3.
>
> Josh
>
> On Wednesday, June 20, 2012 9:12:52 AM Michael Jinks wrote:
> > Thanks Aaron.
> >
> > Ah, yes. It didn't occur to me that we'd have to have MAC addresses
> > defined for a machine we're capturing *from*. I figured, well, it's
> > running and has IP addresses...
> >
> > At any rate, I'm looking around the UI and I can't find any page that
> > will let me enter a MAC address for an existing computer record. Is
> > this something I have to do by hand in the database?
> >
> > On Wed, Jun 20, 2012 at 08:46:40AM -0400, Aaron Peeler wrote:
> > > Hello Michael,
> > >
> > > One thing that stands out in the log is that your MAC addresses are not
> > > defined. computer eth0 MAC address: <undefined>
> > > computer eth1 MAC address: <undefined>
> > >
> > > This will be needed to correctly create the vmx file and thus get an
> > > address from the private dhcp server that is should be running on your
> > > management node.
> > >
> > > Secondly also make sure you have the dhcp server setup on your
> > > management node for the private network.
> > >
> > > Aaron
> > >
> > > On Tue, Jun 19, 2012 at 5:53 PM, Michael Jinks <mji...@uchicago.edu>
> wrote:
> > > > Hi, all.
> > > >
> > > > Trying to resurrect a thread I started on Friday, subject 'Image capture
> > > > succeeds, then "fails"'. ?Mike Haudenschild helped me narrow down the
> > > > problem but so far I haven't been able to find a cause or a fix.
> > > >
> > > > I'm trying to capture my first Linux VM. ?Things go along okay through
> > > > the capture stage, but (thanks Mike) we fail when VCL tries to reserve
> > > > and deploy the new image.
> > > >
> > > > The critical message from the log appears to be:
> > > >
> > > > ?|17491|19:19|reload| ---- WARNING ----
> > > > ?|17491|19:19|reload| 2012-06-19
> > > > ?14:10:22|17491|19:19|reload|VMware.pm:load(395)|failed to prepare vmx
> > > > file for vcl-linux-template-2-bak on VM host: vcl0001
> > > > ?|17491|19:19|reload| ( 0) VMware.pm, load (line: 395)
> > > > ?|17491|19:19|reload| (-1) new.pm, reload_image (line: 618)
> > > > ?|17491|19:19|reload| (-2) new.pm, process (line: 248)
> > > > ?|17491|19:19|reload| (-3) vcld, make_new_child (line: 568)
> > > > ?|17491|19:19|reload| (-4) vcld, main (line: 346)
> > > >
> > > >
> > > > Further down, I'll paste in a complete copy of the log mail I got from
> > > > this attempt.
> > > >
> > > > Our VM storage settings for this VM host are:
> > > >
> > > > ?Repository Path: ? ? ? /vmfs/volumes/nfs-vcl-templates
> > > > ?Data Store Path: ? ? ? /vmfs/volumes/T2_6045_dev_VCL_ds01
> > > > ?VM Path: ? ? ? /vmfs/volumes/T2_6045_dev_VCL_ds01
> > > >
> > > > (Note Data Store and VM are explicitly the same; we've also had VM Path
> > > > set to "(empty)" with no apparent difference in behavior.)
> > > >
> > > > Both of those paths are writable on the hypervisor. ?During capture, a
> > > > VM directory appears in both locations. ?In the directory under the
> > > > Repository path, we have many vmdk files, sizes ranging from 842M to
> > > > 1.5k, with names like:
> > > >
> > > > ?vmwarelinux-linuxtemplate2v1226-v0-s001.vmdk
> > > > ?vmwarelinux-linuxtemplate2v1226-v0-s002.vmdk
> > > > ?vmwarelinux-linuxtemplate2v1226-v0-s003.vmdk
> > > > ?[...]
> > > > ?vmwarelinux-linuxtemplate2v1226-v0-s016.vmdk
> > > > ?vmwarelinux-linuxtemplate2v1226-v0.vmdk
> > > >
> > > > My first guess is that we have one vmdk file for each attempted capture,
> > > > and this is a series of xdiffs on the original?
> > > >
> > > > In the Data Store/VM directory, we have:
> > > >
> > > > ?# pwd
> > > > ?/vmfs/volumes/T2_6045_dev_VCL_ds01/vmwarelinux-linuxtemplate2v1226-v0
> > > > ?# ls -lh
> > > > ?-rw------- ? ?1 root ?root ? 30.0G Jun 19 20:12
> > > > vmwarelinux-linuxtemplate2v1226-v0-flat.vmdk ?-rw------- ? ?1 root
> > > > ?root ? ? 527 Jun 19 20:12 vmwarelinux-linuxtemplate2v1226-v0.vmdk
> > > >
> > > > So, it seems that those locations are accessible and writable, and being
> > > > written. ?What else might cause the vmx file prep to fail? ?I went to
> > > > VMware.pm line 395, but that's a call to a subroutine, prepare_vmx(),
> > > > which is a fairly lengthy chunk of code and doesn't appear to be
> > > > dropping any breadcrumbs as it runs, only the failure message when it
> > > > exits. ?So stepping through that without guidance is going to be a
> > > > challenge.
> > > >
> > > > Meanwhile we've also started trying to capture a Windows image. ?That's
> > > > dying too, but with a different set of error messages. ?I'll post that
> > > > under separate cover.
> > > >
> > > > Thanks for any insight. ?Complete log message follows.
> > > > -m
> > > >
> > > >
> > > > reservation failed on vcl-linux-template-2-bak: process failed after
> > > > trying to load or make available
> > > > -----------------------------------------------------------------------
> > > > - time: 2012-06-19 14:10:22
> > > > caller: State.pm:reservation_failed(213)
> > > > ( 0) State.pm, reservation_failed (line: 213)
> > > > (-1) new.pm, process (line: 298)
> > > > (-2) vcld, make_new_child (line: 568)
> > > > (-3) vcld, main (line: 346)
> > > > ------------------------------------------------------------------------
> > > > management node: pilot-lab.uchicago.edu
> > > > reservation PID: 17491
> > > > parent vcld PID: 2491
> > > >
> > > > request ID: 19
> > > > reservation ID: 19
> > > > request state/laststate: reload/image
> > > > request start time: 2012-06-19 14:10:12
> > > > request end time: 2012-06-19 14:40:12
> > > > for imaging: no
> > > > log ID: none
> > > >
> > > > computer: vcl-linux-template-2-bak
> > > > computer id: 7
> > > > computer type: virtualmachine
> > > > computer eth0 MAC address: <undefined>
> > > > computer eth1 MAC address: <undefined>
> > > > computer private IP address: 10.50.84.15
> > > > computer public IP address: 10.50.84.15
> > > > computer in block allocation: no
> > > > provisioning module: VCL::Module::Provisioning::VMware::VMware
> > > >
> > > > vm host: vcl0001
> > > > vm host ID: 1
> > > > vm host computer ID: 1
> > > > vm profile: VMware ESXi - IT Services
> > > > vm profile VM path: /vmfs/volumes/T2_6045_dev_VCL_ds01
> > > > vm profile repository path: /vmfs/volumes/nfs-vcl-templates
> > > > vm profile datastore path: /vmfs/volumes/T2_6045_dev_VCL_ds01
> > > > vm profile disk type: localdisk
> > > >
> > > > image: vmwarelinux-linuxtemplate2v1226-v0
> > > > image display name: linux-template-2v12
> > > > image ID: 26
> > > > image revision ID: 22
> > > > image size: 30720 MB
> > > > use Sysprep: yes
> > > > root access: yes
> > > > image owner ID: 1
> > > > image owner affiliation: Local
> > > > image revision date created: 2012-06-19 14:08:20
> > > > image revision production: yes
> > > > OS module: VCL::Module::OS::Linux
> > > >
> > > > user: vclreload
> > > > user name: vcl reload
> > > > user ID: 2
> > > > user affiliation: Local
> > > > ------------------------------------------------------------------------
> > > > RECENT LOG ENTRIES FOR THIS PROCESS:
> > > > 2012-06-19
> > > > 14:10:20|17491|19:19|reload|VMware.pm:get_image_size_bytes(3841)|retrie
> > > > ved the size of the image from the datastore on the VM host:
> > > > 32,212,255,247> >
> > > > 2012-06-19 14:10:20|17491|19:19|reload|
> VMware.pm:get_image_size_bytes(3851)|image size retrieved from both the image
> repository and VM host datastore:
> > > > |17491|19:19|reload| image repository: 2,398,356,996
> > > > |17491|19:19|reload| VM host datastore: 32,212,255,247
> > > >
> > > > 2012-06-19 14:10:20|17491|19:19|reload|
> VMware.pm:get_image_size_bytes(3871)|size of vmwarelinux-linuxtemplate2v1226-
> v0 image:
> > > > |17491|19:19|reload| 32,212,255,247 bytes
> > > > |17491|19:19|reload| 30,720 MB
> > > > |17491|19:19|reload| 30.00 GB
> > > >
> > > > 2012-06-19
> > > > 14:10:20|17491|19:19|reload|VMware.pm:get_vm_additional_vmx_bytes_requi
> > > > red(4713)|8053063811 additional bytes required for REDO files because VM
> > > > disk mode is NOT persistent> >
> > > > 2012-06-19 14:10:20|17491|19:19|reload|
> VMware.pm:get_vm_additional_vmx_bytes_required(4716)|estimate of additional
> space required for the vmx directory:
> > > > |17491|19:19|reload| vmem/vswp file: 536,870,912 bytes, 512.0 MB, 0.50
> > > > |GB
> > > > |17491|19:19|reload| redo files: 8,053,063,811 bytes, 7,680.0 MB, 7.50
> > > > |GB
> > > > |17491|19:19|reload| total: 8,589,934,723 bytes, 8,192.0 MB, 8.00 GB
> > > >
> > > > 2012-06-19
> > > > 14:10:20|17491|19:19|reload|Linux.pm:file_exists(1404)|'/vmfs/volumes/T
> > > > 2_6045_dev_VCL_ds01/vmwarelinux-linuxtemplate2v1226-v0/vmwarelinux-linux
> > > > template2v1226-v0.vmdk' exists on vcl0001, files: 1, directories: 0,
> > > > links: 0 2012-06-19
> > > > 14:10:20|17491|19:19|reload|VMware.pm:get_image_size_bytes(3819)|VM
> > > > profile vmdisk is set to 'localdisk', attempting to retrieve image size
> > > > from image repository 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Linux.pm:file_exists(1404)|'/vmfs/volumes/n
> > > > fs-vcl-templates' exists on vcl0001, files: 0, directories: 0, links: 1
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:is_repository_mounted_on_vmhost(5
> > > > 485)|image repository is mounted on VM host vcl0001:
> > > > /vmfs/volumes/nfs-vcl-templates 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:get_image_size_bytes(3821)|checki
> > > > ng size of image in image repository mounted on VM host:
> > > > vcl0001:/vmfs/volumes/nfs-vcl-templates> >
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Linux.pm:get_file_size(2022)|size
> of '/vmfs/volumes/nfs-vcl-templates/vmwarelinux-linuxtemplate2v1226-
> v0/vmwarelinux-linuxtemplate2v1226-v0*.vmdk' on vcl0001:
> > > > |17491|19:19|reload| used: 2,398,356,996 bytes, 2,287.3 MB, 2.23 GB
> > > > |17491|19:19|reload| allocated: 3,605,390,848 bytes, 3,438.4 MB, 3.36 GB
> > > >
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Linux.pm:get_file_size(2022)|size
> of '/vmfs/volumes/T2_6045_dev_VCL_ds01/vmwarelinux-linuxtemplate2v1226-
> v0/vmwarelinux-linuxtemplate2v1226-v0*.vmdk' on vcl0001:
> > > > |17491|19:19|reload| used: 32,212,255,247 bytes, 30,720.0 MB, 30.00 GB
> > > > |17491|19:19|reload| allocated: 32,212,320,256 bytes, 30,720.1 MB, 30.00
> > > > |GB
> > > >
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:get_image_size_bytes(3841)|retrie
> > > > ved the size of the image from the datastore on the VM host:
> > > > 32,212,255,247> >
> > > > 2012-06-19 14:10:21|17491|19:19|reload|
> VMware.pm:get_image_size_bytes(3851)|image size retrieved from both the image
> repository and VM host datastore:
> > > > |17491|19:19|reload| image repository: 2,398,356,996
> > > > |17491|19:19|reload| VM host datastore: 32,212,255,247
> > > >
> > > > 2012-06-19 14:10:21|17491|19:19|reload|
> VMware.pm:get_image_size_bytes(3871)|size of vmwarelinux-linuxtemplate2v1226-
> v0 image:
> > > > |17491|19:19|reload| 32,212,255,247 bytes
> > > > |17491|19:19|reload| 30,720 MB
> > > > |17491|19:19|reload| 30.00 GB
> > > >
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:get_vm_additional_vmdk_bytes_requ
> > > > ired(4657)|no additional space required for vmdk files because they
> > > > already exist on VM host 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:get_vm_additional_vmdk_bytes_requ
> > > > ired(4662)|VM requires appoximately 0 additional bytes (0 MB, 0 GB) of
> > > > disk space on the VM host for the vmdk directory 2012-06-19
> > > > 14:10:21|17491|19:19|reload|VMware.pm:check_vmhost_disk_space(2070)|eno
> > > > ugh space is available on shared vmx/vmdk volume on VM host vcl0001:
> > > > '/vmfs/volumes/T2_6045_dev_VCL_ds01'> >
> > > > |17491|19:19|reload| vmx additional space required: ? ? ? ?
> > > > |?8,589,934,723 bytes, 8,192.0 MB, 8.00 GB 17491|19:19|reload| vmdk
> > > > |additional space required: ? ? ? ? 0 bytes, 0.0 MB, 0.00 GB
> > > > |17491|19:19|reload| total additional space required: ? ? ?
> > > > |?8,589,934,723 bytes, 8,192.0 MB, 8.00 GB 17491|19:19|reload| shared
> > > > |vmx/vmdk volume available space: 1,042,905,300,992 bytes, 994,592.0
> > > > |MB, 971.28 GB> >
> > > > 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:create_mn_os_object(335)|manageme
> > > > nt node OS object has already been created, address: 3997f10, returning
> > > > 1 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:new(203)|VCL::Module::Semaphore
> > > > object created, address: 3cd4360 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:code_loop_timeout(742)|attempting
> > > > to open lockfile, maximum of 1200 seconds 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:code_loop_timeout(759)|attempt 1:
> > > > attempting to open lockfile 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Semaphore.pm:open_lockfile(146)|opened and
> > > > obtained an exclusive lock on file:
> > > > /tmp/vcl0001-vmfs-volumes-T2_6045_dev_VCL_ds01-vmwarelinux-linuxtemplat
> > > > e2v1226-v0.lock 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:code_loop_timeout(762)|attempting
> > > > to open lockfile, code returned true 2012-06-19
> > > > 14:10:21|17491|19:19|reload|Module.pm:get_semaphore(844)|created
> > > > Semaphore object, memory address: 3cd4360 2012-06-19
> > > > 14:10:22|17491|19:19|reload|Linux.pm:file_exists(1404)|'/vmfs/volumes/T
> > > > 2_6045_dev_VCL_ds01/vmwarelinux-linuxtemplate2v1226-v0/vmwarelinux-linux
> > > > template2v1226-v0.vmdk' exists on vcl0001, files: 1, directories: 0,
> > > > links: 0 2012-06-19
> > > > 14:10:22|17491|19:19|reload|VMware.pm:prepare_vmdk(1785)|VM is not
> > > > persistent and nonpersistent vmdk file already exists on VM host
> > > > vcl0001:
> > > > /vmfs/volumes/T2_6045_dev_VCL_ds01/vmwarelinux-linuxtemplate2v1226-v0/v
> > > > mwarelinux-linuxtemplate2v1226-v0.vmdk 2012-06-19
> > > > 14:10:22|17491|19:19|reload|Semaphore.pm:release_lockfile(248)|deleted
> > > > file:
> > > > /tmp/vcl0001-vmfs-volumes-T2_6045_dev_VCL_ds01-vmwarelinux-linuxtemplat
> > > > e2v1226-v0.lock 2012-06-19
> > > > 14:10:22|17491|19:19|reload|Semaphore.pm:DESTROY(281)|destroyed
> > > > Semaphore object, memory address: 3cd4360 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:insertloadlog(3875)|inserted
> > > > computer=7, transfervm, copied vmwarelinux-linuxtemplate2v1226-v0 to
> > > > vcl-linux-template-2-bak 2012-06-19
> > > > 14:10:22|17491|19:19|reload|VMware.pm:get_vm_ram(4306)|image ram
> > > > setting is too low: 0 MB, 512 MB will be used 2012-06-19
> > > > 14:10:22|17491|19:19|reload|VMware.pm:get_vm_os_configuration(4210)|ret
> > > > rieved default VM configuration for OS: linux-x86_64> >
> > > > |17491|19:19|reload| : {
> > > > |17491|19:19|reload| : ? "ethernet-virtualDev" => "e1000",
> > > > |17491|19:19|reload| : ? "guestOS" => "otherlinux-64",
> > > > |17491|19:19|reload| : ? "scsi-virtualDev" => "lsiLogic"
> > > > |17491|19:19|reload| : }
> > > > |17491|19:19|reload| ---- WARNING ----
> > > > |17491|19:19|reload| 2012-06-19
> > > > |14:10:22|17491|19:19|reload|DataStructure.pm:_automethod(812)|correspo
> > > > |nding data has not been initialized for get_computer_eth0_mac_address:
> > > > |$self->request_data->{reservation}{19}{computer}{eth0macaddress}
> > > > |17491|19:19|reload| ( 0) DataStructure.pm, _automethod (line: 812)
> > > > |17491|19:19|reload| (-1) Autoload.pm, __ANON__ (line: 80)
> > > > |17491|19:19|reload| (-2) VMware.pm, prepare_vmx (line: 1457)
> > > > |17491|19:19|reload| (-3) VMware.pm, load (line: 394)
> > > > |17491|19:19|reload| (-4) new.pm, reload_image (line: 618)
> > > > |17491|19:19|reload| (-5) new.pm, process (line: 248)
> > > > |17491|19:19|reload| ---- WARNING ----
> > > > |17491|19:19|reload| 2012-06-19
> > > > |14:10:22|17491|19:19|reload|VMware.pm:load(395)|failed to prepare vmx
> > > > |file for vcl-linux-template-2-bak on VM host: vcl0001
> > > > |17491|19:19|reload| ( 0) VMware.pm, load (line: 395)
> > > > |17491|19:19|reload| (-1) new.pm, reload_image (line: 618)
> > > > |17491|19:19|reload| (-2) new.pm, process (line: 248)
> > > > |17491|19:19|reload| (-3) vcld, make_new_child (line: 568)
> > > > |17491|19:19|reload| (-4) vcld, main (line: 346)
> > > > |17491|19:19|reload| ---- WARNING ----
> > > > |17491|19:19|reload| 2012-06-19
> > > > |14:10:22|17491|19:19|reload|new.pm:reload_image(623)|vmwarelinux-linux
> > > > |template2v1226-v0 failed to load on vcl-linux-template-2-bak, returning
> > > > |17491|19:19|reload| ( 0) new.pm, reload_image (line: 623)
> > > > |17491|19:19|reload| (-1) new.pm, process (line: 248)
> > > > |17491|19:19|reload| (-2) vcld, make_new_child (line: 568)
> > > > |17491|19:19|reload| (-3) vcld, main (line: 346)
> > > >
> > > > 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:insertloadlog(3875)|inserted
> > > > computer=7, loadimagefailed, vmwarelinux-linuxtemplate2v1226-v0 failed
> > > > to load on vcl-linux-template-2-bak> >
> > > > |17491|19:19|reload| ---- WARNING ----
> > > > |17491|19:19|reload| 2012-06-19
> > > > |14:10:22|17491|19:19|reload|new.pm:process(295)|failed to load
> > > > |vcl-linux-template-2-bak with vmwarelinux-linuxtemplate2v1226-v0
> > > > |17491|19:19|reload| ( 0) new.pm, process (line: 295)
> > > > |17491|19:19|reload| (-1) vcld, make_new_child (line: 568)
> > > > |17491|19:19|reload| (-2) vcld, main (line: 346)
> > > >
> > > > 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_computer_state_name(23
> > > > 05)|attempting to retrieve current state of computer
> > > > vcl-linux-template-2-bak from the database 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_computer_state_name(23
> > > > 36)|retrieved current state of computer vcl-linux-template-2-bak from
> > > > the database: reloading 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:_automethod(834)|data
> > > > structure updated:
> > > > $self->request_data->{reservation}{19}{computer}{state}{name}> >
> > > > |17491|19:19|reload| computer_state_name = reloading
> > > >
> > > > 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_computer_private_ip_ad
> > > > dress(1581)|attempting to retrieve private IP address for computer:
> > > > vcl-linux-template-2-bak 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_computer_private_ip_ad
> > > > dress(1585)|retrieved contents of /etc/hosts on this management node,
> > > > contains 18 lines 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_computer_private_ip_ad
> > > > dress(1645)|returning IP address from /etc/hosts file: 10.50.84.15
> > > > 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:is_inblockrequest(6163)|zero rows
> > > > were returned from database select 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:get_image_affiliation_name
> > > > (2035)|image owner id: 1 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:getnewdbh(2709)|database requested
> > > > (information_schema) does not match handle stored in $ENV{dbh}
> > > > (vcl:128.135.107.122) 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:getnewdbh(2760)|database handle
> > > > stored in $ENV{dbh} 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:retrieve_user_data(1352)|a
> > > > ttempting to retrieve and store data for user: user.id = '1' 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:getnewdbh(2709)|database requested
> > > > (vcl) does not match handle stored in $ENV{dbh}
> > > > (information_schema:128.135.107.122) 2012-06-19
> > > > 14:10:22|17491|19:19|reload|utils.pm:getnewdbh(2760)|database handle
> > > > stored in $ENV{dbh} 2012-06-19
> > > > 14:10:22|17491|19:19|reload|DataStructure.pm:retrieve_user_data(1415)|d
> > > > ata has been retrieved for user: admin (id: 1)
> - --
> - -------------------------------
> Josh Thompson
> VCL Developer
> North Carolina State University
>
> my GPG/PGP key can be found at pgp.mit.edu
>
> All electronic mail messages in connection with State business which
> are sent to or received by this account are subject to the NC Public
> Records Law and may be disclosed to third parties.
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.17 (GNU/Linux)
>
> iEYEARECAAYFAk/h2yoACgkQV/LQcNdtPQNYCwCfcWNdBbopf+RZXv8XaW7vbSVM
> DukAn2Jf9bCwqoObueZtHRDydTevhMX1
> =ucyU
> -----END PGP SIGNATURE-----
>
--
Michael Jinks :: mji...@uchicago.edu :: 773-469-9688
University of Chicago IT Services
