Again: reduce to one DVB-S card, get rid of the switch, direct connection from dish to DVB card.
And BTW: kyrill moved my SAT dish .. so, why are you sure, that your dish is rocket solid? -----Ursprüngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Peer Oliver Schmidt Gesendet: Montag, 29. Januar 2007 17:37 An: VDR Mailing List Betreff: Re:[vdr] Problems receiving couple of german channels DVB-S Hello again martin, > we need to put then an eye on your hardware setup - this is a problem before > the DVB-S cards. You where talking about 3 DVB-S cards, but how many LNB's > do you have? How have you wired the system? We have: horizontal / vertical > polarization and then lower and upper band! This makes 2x2 = 4 possible > areas. So, if you go with more than 2 cards - 3 or 4 or more, you need a > quad LNB with maybe some additional hardware. I have four cables going from my LNB to a multiswitch. Three cables go from the multiswitch to the DVB-S cards. If any of the four cables going to the Multiswitch were wrong, wouldn't the channels not work at all? I've looked thru the different channel settings, but could not find anything obvious, which would differentiate the good and the bad channels ... Any ideas what else I can test? Thanks. -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA _______________________________________________ vdr mailing list email@example.com http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr