Simon Baxter wrote:
> Thought I'd try a new thread with this problem as I'm getting no where - and
> not sure what else to try.
> 
> I've just added a Irdeto CAM to my TT-1500 Budget DVB-C card and I'm getting
> write errors with VDR and with gnutv:
> 
> [EMAIL PROTECTED] gnutv]# dmesg | grep DVB
> DVB: registering new adapter (TT-Budget-C-CI PCI).
> DVB: registering frontend 0 (ST STV0297 DVB-C)...
> dvb_ca adapter 0: DVB CAM detected and initialised successfully
> dvb_ca adapter 0: DVB CAM detected and initialised successfully
> 
> [EMAIL PROTECTED] gnutv]# ./gnutv -cammenu
> en50221_tl_poll: CAWrite failed
> en50221_stdcam_llci_poll: Error reported by stack:-2
> 
> and
> 
> In /var/log/messages:
> Apr 30 19:31:26 media1 vdr: [2774] CAM 1: module present
> Apr 30 19:31:28 media1 kernel: dvb_ca adapter 0: DVB CAM detected and
> initialised successfully
> Apr 30 19:31:28 media1 vdr: [2774] CAM 1: module ready
> Apr 30 19:31:29 media1 vdr: [2774] ERROR: can't write to CI adapter on
> device 0: Input/output error
> 
> In dmesg:
> dvb_ca adapter 0: DVB CAM detected and initialised successfully
> dvb_ca adapter 0: DVB CAM detected and initialised successfully
> dvb_ca adapter 0: DVB CAM detected and initialised successfully
> 
> I'm running the latest hg v4l-dvb.
> 
> Can anyone suggest anything?  Does this look like faulty hardware???  It
> does it in 2 different machines.

It is indeed not flaky hardware as i wrote earlier. -2 is timeout. It is
due to a bug in debiread/write


_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Reply via email to