Hi,
I have a V1.3 FF card that I needed to remove from my VDR as it caused 
problems while trying to record from Film4. I'm currently testing the 
card in another PC. It can tune to and record from Hi + Lo and H+V 
channels. But when I tune to anothe channel on the same transponder I get:

Mar 11 17:46:36 brian vdr: [6802] frontend 0 timed out while tuning to 
channel 1183, tp 210729
Mar 11 17:47:40 brian vdr: [6802] frontend 0 timed out while tuning to 
channel 1183, tp 210729
Mar 11 17:48:44 brian vdr: [6802] frontend 0 timed out while tuning to 
channel 1183, tp 210729
Mar 11 17:49:48 brian vdr: [6802] frontend 0 timed out while tuning to 
channel 1183, tp 210729

Now the info for Film 4 in channels.conf is the following:
Film4 
+1;BSkyB:10729:vC56:S28.2E:22000:2329+2309:2330=eng,2331=NAR:2332:0:8330:2:2042:0
 

Film4;BSkyB:10729:vC56:S28.2E:22000:2311+2308:2312=eng,2313=NAR:2314:0:8335:2:2042:0
 


Plus some other on the same transponder:

E4+1;BSkyB:10729:vC56:S28.2E:22000:2336+2305:2337=eng,2338=NAR:2339:960,961:8300:2:2042:0
 

E4;BSkyB:10729:vC56:S28.2E:22000:2321+2306:2322=eng,2323=NAR:2324:960,961:8305:2:2042:0
 

More4 
+1;BSkyB:10729:vC56:S28.2E:22000:2345+2307:2346=eng,2347=NAR:2348:960,961:8310:2:2042:0
 

FF 
TEST1;BSkyB:10729:vC56:S28.2E:22000:2311+2308:2312=eng:2314:0:8336:2:2042:0 


Only FF Test seems to be FTA.

This is a pretty low frequency. Could that be the problem? In my VDR the 
  replacemnt card, a budget Nova-S seems to be quite happily recording 
Film 4 so my Multiswitch and LNB seem to be OK.

What is strangle is that although Filem 4 is on 10729, the message says:

Mar 11 17:49:48 brian vdr: [6802] frontend 0 timed out while tuning to 
channel 1183, tp 210729  <------- ???????

Does that mean anything? Still using VDR 1.3.24, but this was tested on 
1.4.7.Hoping to go straight to 1.6 if possible.

Cheers Brian



_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Reply via email to