Klaus Schmidinger kirjoitti 3.5.2008 kello 19.06:
> On 05/03/08 16:24, Tero Siironen wrote:
>> Klaus Schmidinger kirjoitti 2.5.2008 kello 17.03:
>>> On 04/27/08 12:49, Tero Siironen wrote:
>>>> I don't know if this is same problem or not but I'm having similar
>>>> symptoms with one encrypted channel. With plain VDR 1.6.0 I cannot
>>>> to that channel, while 1.4.7 works. As can be seen from the log,
>>>> receiving starts from couple of seconds but stops right after
>>>> this channel not available message. My system has DVB-C 2.1 FF card
>>>> Satelco Easywatch budget card. All the other encrypted channels
>>>> ok, but this one channel has problems with VDR 1.6.0.
>>> Your CAM seems to "come and go".
>>> Please try the 1.6.0-1 maintenance patch from
>>> which increases the time between the CAM status checks.
>> Doesn't help, log is pretty similar still and picture shows now and
>> then for couple of seconds
> Looks like there are no more unexpected CAM resets, so the reason
> for the
> "channel not available" must be something else. Maybe the CAM doesn't
> You could add some debug output to cDevice::Action() to see whether
> the TS packets are getting descrambled. Maybe the
> needs to be increased.
I will try to debug it more. The same channel works with VDR 1.4.7 so
the CAM works. Also with 1.6.0-1 all other encrypted channels that
I've access works with that CAM, so there is something in that one
channel which causes problems with 1.6.0-1. But I will report again
when I get some more data.
vdr mailing list