Sorry to bother this list but maybe someone could help me.
I´m using vdr1.4.7 on a Suse10.3 with one FF-DVB-S-Card (technotrend
rev.1.3) and one budget DVB-T (winTV nova).
Everything worked well until yesterday.
When I turned on the TV there was no output on the TV and when one timer
started recording vdr terminated and runvdr tried to start it again -
but the videosignal didn´t come up.
vdr:  switching device 2 to channel 16
Jul 21 18:28:41 vdr vdr:  timer 2 (16 1813-1850 'Wunderbare Reise
Jul 21 18:28:41 vdr vdr:  Title: 'Wunderbare Reise des kleinen
Jul 21 18:28:41 vdr vdr:  record
Jul 21 18:28:41 vdr vdr:  cFileName::SetOffset: removing
Jul 21 18:28:41 vdr vdr:  recording to
Jul 21 18:28:41 vdr vdr:  transfer thread started (pid=4524, tid=4537)
Jul 21 18:28:41 vdr vdr:  receiver on device 2 thread started
Jul 21 18:28:41 vdr vdr:  file writer thread started (pid=4524,
Jul 21 18:28:41 vdr vdr:  recording thread started (pid=4524,
Jul 21 18:28:41 vdr vdr:  TS buffer on device 2 thread started
Jul 21 18:28:49 vdr vdr:  frontend 1 timed out while tuning to
Jul 21 18:28:50 vdr vdr:  max. latency time 1 seconds
Jul 21 18:29:12 vdr vdr:  ERROR: video data stream broken
Jul 21 18:29:12 vdr vdr:  initiating emergency exit
This happens every minute. When I deleted the timer vdr didn´t exit
anymore and one could watch recordings and the channels from the
DVB-T-device, but all satelite-channels were gone.
The LNB seems alright for I can watch the satelite-channels with my old
It seems to me, that the tuner on the FF-card is done in?! Or is ther
another explanation for this behavior? I didn´t update the kernel or
change the driver.
Thank you in advance for any advice
vdr mailing list