> Hello All, > > Today I finished the patch for DVB-S, DVB-S2, DVB-T and DVB-C support using > S2API > in combination with VDR 1.7.0. > I've tested my code on DVB-S, DVB-S2 and DVB-T transports and they were > all successful. DVB-C is untested (don't have a DVB-C option where I > live) but it should work in *THEORY* ;) > > DVB-S and DVB-S2 were tested on a Hauppauge WinTV-NOVA-HD-S2 card. > DVB-T was tested on a Gigabyte GT-U7000-RH USB device. > I used the latest v4l pull and viewing was very stable with both DVB > devices. I also didn't had any problems any more when switching between > DVB-S(2) and DVB-T, but it can be that this patch will *NOT* work > correctly on MFE DVB devices like the HVR-3000 or HVR-4000 (I had to do some > hacking because strangely, > DVB-T transports were offered to my DVB-S DVB device). Since I can't > test this, I hope others can tell me if it works or not. > > Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 > source tree patched with Reinhard's > vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 > > patch. The patched patch is for those who have used Edgar (gimli) > Hucek's patch for VDR 1.7.0. In theory it should also work with my last send > patch.
Hi I tried your patch and vdr fails to show dvb-t channels for me while dvb-s channels works ok. I have tested with a following setup: - vdr-1.7.0 + vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff + vdr-1.7.0-s2api-04102008-clean.patch - latest s2-mfe installed for 2.6.27-rc8 - card-0: hvr-1300 (dvb-t, terrestrial cable connected) - card-1: hvr-4000 (dvb-t, dvb-s, dvb-s2, only satellite cable connected) [EMAIL PROTECTED] ~]$ ls -la /dev/dvb/adapter0/ total 0 drwxr-xr-x 2 root root 120 2008-10-05 10:56 ./ drwxr-xr-x 4 root root 80 2008-10-05 10:56 ../ crw-rw----+ 1 lamikr video 212, 4 2008-10-05 10:56 demux0 crw-rw----+ 1 lamikr video 212, 5 2008-10-05 10:56 dvr0 crw-rw----+ 1 lamikr video 212, 3 2008-10-05 10:56 frontend0 crw-rw----+ 1 lamikr video 212, 7 2008-10-05 10:56 net0 [EMAIL PROTECTED] ~]$ ls -la /dev/dvb/adapter1/ total 0 drwxr-xr-x 2 root root 200 2008-10-05 10:56 ./ drwxr-xr-x 4 root root 80 2008-10-05 10:56 ../ crw-rw----+ 1 lamikr video 212, 68 2008-10-05 10:56 demux0 crw-rw----+ 1 lamikr video 212, 84 2008-10-05 10:56 demux1 crw-rw----+ 1 lamikr video 212, 69 2008-10-05 10:56 dvr0 crw-rw----+ 1 lamikr video 212, 85 2008-10-05 10:56 dvr1 crw-rw----+ 1 lamikr video 212, 67 2008-10-05 10:56 frontend0 crw-rw----+ 1 lamikr video 212, 83 2008-10-05 10:56 frontend1 crw-rw----+ 1 lamikr video 212, 71 2008-10-05 10:56 net0 crw-rw----+ 1 lamikr video 212, 87 2008-10-05 10:56 net1 I also tried to connect the terrestrial cable to hvr-4000, but it did not change anything. If I use tzap, dvbstream and mplayer compination for hvr-1300 or if I use vdr-1.7.0 with liplianis multiptoto drivers, then also dvb-t channels works ok. Mika _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
