VDR developer version 2.1.3 is now available at


A 'diff' against the previous version is available at


MD5 checksums:

054f80e0045aa6fad118e9285b52f4f2  vdr-2.1.3.tar.bz2
3c5ab05d5c4d0b984b34e84190e80949  vdr-2.1.2-2.1.3.diff


This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

Originally I intended to release this version only after the new DiSEqC
configuration dialog was finished. But in the meantime quite a few other things
have come up, so I decided to postpone that dialog and first release what has
piled up so far.

The changes since version 2.1.2:

- Changed the return value of cPositioner::HorizonLongitude() to 0 in case the
  latitude of the antenna location is beyond +/-81 degrees.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf Ahrenberg).
- Changed the name of the SVDRP command RENR to MOVR (suggested by Rolf 
- When cutting a recording it is now checked whether there is already an edited
  version of this recording (with the same name, but starting with '%'), and the
  user is prompted for confirmation to overwrite it (suggested by Rolf 
- Revoked "Added maximum signal strength value for TechniSat SkyStar 2 DVB-S rev 
  because it broke things for the "TechniSat AirStar 2" DVB-T card.
- The LIRC remote control now connects to the socket even if it doesn't yet 
exist when
  VDR is started (thanks to Lars Hanisch).
- Changed the absolute latitude limit for visible satellites to 81.2 degrees.
- Added code for parsing LCN and AVC descriptors to libsi (thanks to Rolf 
- In the "Select folder" menu pressing Ok now selects the folder, even if this 
is a
  folder that contains sub folders (marked with "..."). To open such a folder 
  can press the Red key.
- Fixed a possible access to uninitialized data in cEIT::cEIT() (reported by 
- The new menu category mcRecordingEdit is now used to mark menus that edit 
  properties (suggested by Stefan Braun).
- Changes in the teletext PID no longer cause retuning (and thus interrupting a
- Removed '_' from the FileNameChars and CharMap translations in uk_UA.po.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed a missing initialization in the c'tor of cSkinLCARSDisplayChannel 
(thanks to
  Marko Mäkelä).
- Simplified some conditional expressions in skinlcars.c and skinsttng.c 
  by Marko Mäkelä).
- Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu (reported 
  Marko Mäkelä).
- Fixed a possible crash if the recordings list is updated externally while the
  Recordings menu is open (reported by Lars Hanisch).
- Added a missing closing ')' in the help and man page entry of the --vfat 
  (reported by Lars Hanisch).
- Fixed setting the name of the video directory to avoid a crash when using 
  and also to use the correct directory with --edit (the latter reported by 
- The Recordings menu can now be called with a cRecordingFilter, which allows 
  caller to have it display only a certain subset of the recordings (thanks to 
- Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to Lars 
- Made it clear that the Data parameter in cDevice::StillPicture() may point to 
  series of packets, not just a single one (thanks to Thomas Reufer).
- cDevice::TrickSpeed() now has an additional parameter named Forward, which 
  the direction in which replay is being done (suggested by Thomas Reufer). This
  information may be necessary for some output devices in order to properly 
  trick modes. Authors of plugins that implement output devices will need to 
add this
  parameter to their derived cDevice class, regardless of whether they will 
make use
  of it or not.
- Added a note to ePlayMode in device.h that VDR itself always uses 
pmAudioVideo when
  replaying a recording (suggested by Thomas Reufer).
- Fixed some spellings in positioner.h and Doxyfile (thanks to Ville Skyttä).
- Changed '%a' to the POSIX compliant '%m' in all scanf() calls (thanks to Ville
- The new function cCamSlot::Decrypt() can be used by derived classes to 
implement a
  CAM slot that can be freely assigned to any device, without being directly 
  into the full TS data stream in hardware. A derived class that implements 
  will also need to set the new parameter ReceiveCaPids in the call to the 
  base class constructor to true, in order to receive the CA pid TS packets that
  contain data necessary for decrypting.
- Many member functions of cCamSlot have been made virtual to allow for easier
  implementation of derived classes.
- cTSBuffer now provides the number of available bytes in its Get() function.
- cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow 
CAM slots
  that can be freely assigned to any device access to the TS data stream.
- Added a check to avoid a possible NULL pointer dereference in 
  (reported by Ville Skyttä).
- Deleted a superfluous assignment in cPipe::Open() (reported by Ville Skyttä).
- The script given to VDR with the '-r' option is now also called after the 
  process has actually started (thanks to Christian Kaiser).
- Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks to Ville 
  Plugin authors may want to apply the following change to their Makefile:
  -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) 
$(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr || pkg-config 
--variable=$(1) ../../../vdr.pc))
  +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell 
PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr))
- Eliminated MAXDVBDEVICES (suggested by Oliver Endriss).
- Channels that are no longer contained in the current SDT of a transponder are 
  marked with the keyword OBSOLETE in their name and provider fields. That way 
you can
  identify obsolete channels when you switch to them, and you can get the 
  overview of all obsolete channels by sorting the Channels list by provider (by
  pressing the 0 key twice). Automatic deletion of obsolete channels may follow 

Have fun!


vdr mailing list

Reply via email to