Thanks for the -- REPLY ALL -- response I'll be filing this in my notes (for future reference).
--doon -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Justin Piszcz Sent: Wednesday, February 04, 2009 11:54 AM To: [email protected] Cc: [email protected]; [email protected]; [email protected] Subject: Re: [Veritas-bu] What are steps to replace drive in ACSLS enviornment ? On Wed, 4 Feb 2009, [email protected] wrote: > I have documented some steps that may be helpful. > > If possible do this when no backups are running. You may need to > de-activate all policies. This should give you a rough idea of the > steps needed. > > Environment: > > STK SL8500 with LTO2 tape drives, controlled by ACSLS server running > version 7.1. Netbackup 6.0 MP4, 5 or 6, 6.5 Windows Master and Media Very nice instructions but IMO there is an easier method: 1. Allow Sun to replace the tape drive. 2. On media server, run /usr/openv/volmgr/bin/stopltid 3. On media server, run /usr/openv/volmgr/bin/ltid 4. You will see DRIVE:MISSING_SN######. 5. On media server, run /usr/openv/volmgr/bin/tpautoconf -replace_drive Drive_Name. 6. It that does not work, delete the drive and re-add it, use the full command line to add the drive and name it. Example: /usr/openv/volmgr/bin/tpconfig -update -robot 0 -drive 3 -robtype acs -ACS 0 -LSM 2 -PANEL 1 -DRIVE 14 ; /usr/openv/volmgr/bin/tpconfig -update -drive 3 -newasciiname Drive21 Justin. _______________________________________________ Veritas-bu maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu _______________________________________________ Veritas-bu maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
