Hi all,
We are using Solaris 10 + 5.0MP1. While trying to dump to tape
I have:
bash-3.00# mt -f /dev/rmt/2 status
HP Ultrium LTO 3 tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 1 block no= 0
bash-3.00# df -h /vxfs/sowa-romeo-vol
Filesystem size used avail capacity Mounted on
/dev/vx/dsk/sowa-romeo-dg/sowa-romeo-vol
200G 94G 100G 49% /vxfs/sowa-romeo-vol
bash-3.00# /usr/sbin/vxdump 0uf /dev/rmt/2cn
/dev/vx/dsk/sowa-romeo-dg/sowa-romeo-vol
vxfs vxdump: Date of this level 0 dump: Tue Feb 19 12:17:28 2008
vxfs vxdump: Date of last level 0 dump: the epoch
Dumping /dev/vx/rdsk/sowa-romeo-dg/sowa-romeo-vol (/vxfs/sowa-romeo-vol)
to /dev/rmt/2cn
vxfs vxdump: mapping (Pass I) [regular files]
vxfs vxdump: mapping (Pass II) [directories]
vxfs vxdump: estimated 196160902 blocks (95781.69MB) on 648.82 tape(s).
vxfs vxdump: dumping (Pass III) [directories]
vxfs vxdump: dumping (Pass IV) [regular files]
vxfs vxdump: Closing /dev/rmt/2cn
vxfs vxdump: Change Volumes: Mount volume #2
vxfs vxdump: Is the new volume mounted and ready to go? ("yes" or "no")
The tape is ok because we were dumping successfully to the same set of tapes
until
we installed 5.0(MP1). During 4.1MP2 there were no such problems. So the
only one change is version of Veritas.
Can anybody help me ?
Regards
przemol
--
http://przemol.blogspot.com/
----------------------------------------------------------------------
Masz ostatnia szanse !
Sprawdz >>> http://link.interia.pl/f1d02
_______________________________________________
Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
