Rene,
just put the catch-plate right above the clamp on the stem.  It will work 
the same.

DonO

----- Original Message ----- 
From: "Rene Zillmann" <rene.zillm...@t-online.de>
To: <vfb-mail@googlegroups.com>
Sent: Monday, November 09, 2009 2:08 PM
Subject: [VFB] Re: Rene- roping Flashabou- tips and photos


>
> Don,
> I agree, once the rope started it can be handled as usually, but I loose
> a lot of material.
> The bag trick sounds good, will try this for sure.
> I'm currently using my Danvise, it has a table clamp - therefore lots of
> stuff on the floor <G>
> I re-use the stuff from the floor and my pants....
> I'll continue to practice
> Rene
>
> Don Ordes wrote:
>> Rene wrote:
>> "Don,
>> > My flashabou consists of very thin and straight  fibers, appr. 1 inch
>> > long. It does not stick together in any way. therefore it is impossible
>> > to form the starting teardrop for the rope process. "  Rene
>>
>> Rene,
>>
>> I went back into my photo archives 8 years ago (file date is 2001) and
>> found the flies I roped with Bob Haering's /'Dubbing >From Hell'./  It
>> worked all ways, just like the lamb's wool- smooth, shaped, fuzzy,
>> self-hackled, rope finished as wing, etc.  One thing missing is
>> furling.  I ran out, so I don't have more samples of different
>> applications.  I quickly learned /not to overhandle/ the dubbing
>> (static worse) and to use the bag trick.
>>
>> Again, these are just the /body techniques/.  Simple flies like this
>> will catch fish/ (about a minute or so to tie),/ or- you can finish
>> your patterns with this as the body, or just add a bead-head or
>> marabou tail.  I would like to try roping peacock with this mixed in
>> for super color highlights.
>>
>> DVD has Flashabou tying segment.
>>
>>
>>
>> Also, if you are using a dubbing that has break-away fibers that you
>> don't want to lose (like this stuff, or seal), just cut out a hole
>> off-center in a small stout paper plate (or Kool-whip lid turned over-
>> sim.) and slide it down over your vise stem, and position it under
>> your roping (snug on the fit).  It will act as a catch-basin for
>> bail-out fibers (or dropped beads, eyes, etc.)  You can collect these
>> fibers for the next tie, or you can wait and make a dubbing blend of
>> the droppings.  Spin it around and it's out of the way after the
>> rope.  Holds sized beads ready for use, too.
>>
>> DonO
>>
>> >
>
>
> > 


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the "VFB Mail" group.

To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this group, send email to 
vfb-mail-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/vfb-mail?hl=en

VFB Mail is sponsored by Line's End Inc at http://www.linesend.com
-~----------~----~----~----~------~----~------~--~---

Reply via email to