on 1/20/04 11:06 PM, Desert Eagle at [EMAIL PROTECTED] wrote:
> A bit back someone posted a wire gauge chart, I can not find it, also, does
> anyone have a sheetmetal gauge chart ???
> 20 Gauge is .XXXX?
> Jimi
The chart I saw doesn't show as big as 20 gauge. But be sure to scroll down
to the bottom.
From: [EMAIL PROTECTED]
Reply-To: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Tuesday, January 6, 2004 12:13 PM
Subject: [VFB] Wire Size
Minimum Nominal Maximum
26 0.0157 0.0159 0.0161
27 0.0141 0.0142 0.0143
28 0.0125 0.0126 0.0127
29 0.0112 0.0113 0.0114
30 0.0099 0.01 0.0101
31 0.0088 0.0089 0.009
32 0.0079 0.008 0.0081
33 0.007 0.0071 0.0072
34 0.0062 0.0063 0.0064
35 0.0055 0.0056 0.0057
36 0.0049 0.005 0.0051
37 0.0044 0.0045 0.0046
38 0.0039 0.004 0.0041
39 0.0034 0.0035 0.0036
40 0.003 0.0031 0.0032
41 0.0027 0.0028 0.0029
42 0.0024 0.0025 0.0026
43 0.0021 0.0022 0.0023
44 0.0019 0.002 0.0021
A 10-second search on Yahoo for "wire gauges" yielded several sites. The
first one I looked at was VERY comprehensive. It gives a very complete
table of wire gauges from 00000000 to 40 gauge for 9 different systems or
manufacturers or types of wire. They are NOT all the same. You can find
this at:
<http://shopswarf.orcon.net.nz/wiregage.html>
Allan
--
Allan Fish
Greenwood, IN
[EMAIL PROTECTED]
