Wow, Something I actually know about, (even have a certificate to prove it).
Question, is it a "clean" break, (by this is it 2 pieces and not badly
splintered)? "Typically" compound composite rods are made with 3 layers,
glass wound on the mandrel, carbon fiber lengthwise with a second glass
wound around it for 3 layers. The number of strands is gradually diminished
from butt to tip to get the action needed or desired. Then the resins are
applied 60/40 in proportion relating to the fibers by weight, heated and
vacuum bagged with bleeder/ breather over peal ply. This allows for a
uniform, repeatable system to make the rods.
Any repair will effect the action, at least some. The only problem is
forming a mandrel to fit inside, and determining the amount of material to
remove in a dished form to repair it with. It can be fixed, but the action
will change some.
Jimi
It is a 'composite' rod, made of both graphite and fiberglass (I think) and
has a really nasty looking break. It doesn't mesh together very well but
hey, it isn't going up on display or anything. I just need a joint so it
works...
I contemplated using a little bit of glass sheet and resin, but want to
consult with the 'experts' before taking any such drastic action.
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/05
