Mike, Deb EZ Body may be the small versions of Tech-flex, because I have plenty of round, clear, small diameter tubing, and then I have a ton of EZ-body stuff that is not like Flex-o, either.
If you are using a 'flat' flex-o, and you want a round body, just turn it inside out. DonO ----- Original Message ----- From: "Deborah Duran" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, March 17, 2005 12:52 PM Subject: RE: [VFB] Flexo Flash > Mike > Rich Murphy uses EZ Body materials almost exclusively. If Bill has a > pro-team so to speak Rich is on it. It sounds like you're describing > something Bill Murphy makes. It could've been a white tubing colored with > permanent markers also. I've seen Rich do that a lot and the EZ Body takes > markers very well. I color mine with pens. > http://e-zbody.com/ > Regards, > Deb > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mike Morris > Sent: Thursday, March 17, 2005 1:41 PM > To: [email protected] > Subject: [VFB] Flexo Flash > > > I recently came across a squid pattern which had a body made from a > light pink stiff netting kind of like a brides veil only much stiffer. > It appeared to be a tubular material like ez-flash but I'm not sure. > Has anybody run across a material like this? I saw a very similar > pattern on the flyfishingconnection.com (RM Short Fin Squid by Rich > Murphy) which used something called flexo flash for the body. It looks > similar (as far as the really lousy picture goes) Does anybody know > about this stuff and where I might get some? > > Mike M. > > > >
