Lagavulin won't work either (bad for your liver, worse for your backcast).
I seem to remember mixing a tiny bit of gasoline with a small piece of a foam cup to make head cement years back. I suppose many plastics and solvents could potentially be candidates for a variety of tying goops. Most are bound to be bad for liver but there are several inert organic substances in nature that work well.
Henk knows this stuff. Where IS the short one from the east side of the pond?
From: "Richard Ross" <[EMAIL PROTECTED]>
Reply-To: <[email protected]>
To: <[email protected]>
Subject: RE: [VFB] Calling all chemists
Date: Wed, 4 Jan 2006 18:18:40 -0500
Xylene will also work. (Equally bad for your liver.)
Richard
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Delaney
Sent: Wednesday, January 04, 2006 4:35 PM
To: [email protected]
Subject: Re: [VFB] Calling all chemists
The solvent used in manufacure of Goop is toluene (sometimes called toluol or methylbenzene). the stuff is not good for your liver and is flammable (not as flammable as acetone). You should make sure you use this material in a well ventilated area. A similar adhesive is E-6000, which is essentially identical to Goop, but the solvent is tetrachloroethylene, a solvent used in dry cleaning (also not good for the liver). Others have used other mixtures of solvent, but I've used toluene with good results.
Mark DelaneyOn 1/4/06, Bruce P. Whittle, DVM <[EMAIL PROTECTED]> wrote:
I know this has been discussed many times before but what is an acceptable
solvent to use to thin Goop to make a substitute for Dave's Flexament?
Thank you in advance for your insight.
Bruce Whittle
--
"So much water, so little time!"
http://chemprof.tripod.com/fishing.html
With MSN Spaces email straight to your blog. Upload jokes, photos and more. It's free!
