Some are, but they are not an inch long and 1/4" diameter..Seriously.. I have a "Texas Bullfrog pattern that I found, and it needs round foam, Chuck
----- Original Message ----- From: DonO To: [email protected] Sent: Monday, May 07, 2007 2:13 PM Subject: Re: [VFB] Cutting Open Cell Foam So what's the problem, Chukkie-poo? Aren't popper bodies tapered anyhow? DonO ----- Original Message ----- From: Chuck Alexander To: [email protected] Sent: Monday, May 07, 2007 12:39 PM Subject: [VFB] Cutting Open Cell Foam Folks: I have some open cell foam ( guess that is what it's called as it is not as dense as craft foam, but less dense than Styrofoam, and IS pliable like the craft foam) that is about one inch thick. I was gonna try to cut some popper bodies with it, so I took a shell casing, hit it with a hammer. It cut the foam OK, but when I took the foam out of the shell casing and it uncompresses (if that is a word), it is tapered on one end.. Any suggestions would be greatly appreciated. Thanks, Chuck ---------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.6.5/792 - Release Date: 5/6/2007 9:01 PM
