Gerd et al.: For quite some time I have been struggling with the analogue coaxial input on my Hauppauge WinTV PCI video capture card. The card was bought in Germany.
I have email Gerd a few times about the messages my kernel prints when I try to play video from my tuner: Oct 7 18:25:21 dragon kernel: msp3400: chip reset failed, penguin on i2c bus? Oct 7 18:25:21 dragon kernel: msp34xx: I/O error #1 (write 0x12/0x08) Oct 7 18:25:21 dragon kernel: msp34xx: I/O error #2 (write 0x12/0x08) Oct 7 18:25:21 dragon kernel: msp34xx: I/O error #3 (write 0x12/0x08) Oct 7 18:25:21 dragon kernel: msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-| Gerd has tweaked the i2c related code a few times, but to no avail. I am currently using version 0.7.80 with Linux 2.4.10. I have also tried bttv 0.8.28 with all of 0.7.80's supporting modules. Luckily, the composite input works fine on the card. If I use the composite input video and audio play nicely. In this case, though, the audio is already split from the video signal before it reaches the Hauppauge card. A very verbose log, produced with the msp3400 and i2c-algo-bit drivers at a debug level of two, is available at http://www.flyn.org/random/msp3400.log. I didn't want to include it in this message because of its size, but I am hoping that someone on this list can use it to shed some light on my problem. Thanks! -- Mike :wq _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
