I have no /proc/video directory, and no video entry in my /proc, the v4l is a module, would that affect this, or maybe version dependant? (Debian 3.0, 2.4.18)
Thanks Arron ----- Original Message ----- From: "Lucas Correia Villa Real" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 02, 2002 8:14 PM Subject: Re: [V4L] vicam Webcam driver > You can try to cat /proc/video/dev/video0: > > $ cat /proc/video/dev/video0 > name : BT878(Hauppauge (bt878)) > type : VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_TELETEXT|VID_TYPE_OVERLAY > hardware : 0x1 > > > Lucas > > > On Mon, 2 Sep 2002 18:19:03 -0400 > "Arron" <[EMAIL PROTECTED]> wrote: > > > The dev/video is linked to video0, this i did find in > > http://www.linux-usb.org/USB-guide/x370.html > > which is some of the documentation i have found. As for xawtv, i am only > > running in console mode to keep it simple and mainly run as a > > server/firewall. Let me know if im off some on this. > > And is there some way to see what /dev/video0 is connected to? In your xawtv > > you have /dev/video0 OK then the information on the device, what would be > > the console command? (cat /proc/bus/usb/devices has the camera listed, but > > how do i list what video0 is?) > > > > Thanks > > Arron > > > > > > > > ----- Original Message ----- > > From: "Stephen Crampton" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, September 02, 2002 5:49 PM > > Subject: Re: [V4L] vicam Webcam driver > > > > > > > > devices, loads the modules it needs, and I made the /dev/video linked > > > > to /dev/video0 and the light comes on the cam. Any capture app I run > > > > > > This sounds peculiar. On my system, /dev/video is a directory and so > > > could not be made to link elsewhere. With some programs, you need to > > > specify the video device as /dev/video0. I recall at least one program > > > had a problem where I had to edit the source code to change the default > > > video device. > > > > > > Try the following: > > > > > > xawtv -hwscan > > > > > > > > > Here's what I get: > > > > > > [stevec@doogles dev]$ xawtv -hwscan > > > This is xawtv-3.54, running on Linux/i686 (2.4.9-34) > > > looking for available devices > > > port 76-76 > > > type : Xvideo, image scaler > > > name : NV10 Video Overlay > > > port 77-108 > > > type : Xvideo, image scaler > > > name : NV05 Video Blitter > > > /dev/video0: OK > > > type : v4l > > > name : OV511+ USB Camera > > > flags: capture > > > [stevec@doogles dev]$ > > > > > > > > > > > > _______________________________________________ > > > Video4linux-list mailing list > > > [EMAIL PROTECTED] > > > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > > > > > > > > > > > > > _______________________________________________ > > Video4linux-list mailing list > > [EMAIL PROTECTED] > > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > > > _______________________________________________ > Video4linux-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/video4linux-list > _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
