I have the same problem but after taking the metal cover of the tuner on the
TV card ( mine is a Flyvideo98) I found it had a chip which had TDA9800
stamped on it not TDA9840/50 etc so I think this is the problem a lot of
people with current card are having, when the kernel loads the i2c and bttv
modules they scan for them (TDA9840, TDA98xx etc) and report the different
model numbers scaned for but mine is never found which is TDA9800 thats why
I think I don't get stereo. BTW I have only been using Linux for 3 months
now and I could be wrong, bye bye win98............................!!!
Anwar
----- Original Message -----
From: "Jacek Pop�awski" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 03, 2000 3:48 PM
Subject: Re: [V4L] bttv 0.7.47 and tda9840
> On Thu, Nov 02, 2000 at 08:35:00PM +0100, Gerd Knorr wrote:
> > > tda9840: chip_write: reg0=0x10
> >
> > This switches the chip to mono.
> >
> > > tda9840: chip_write: reg0=0x2a
> >
> > This is stereo. You should have stereo sound at this point.
>
> yes, I know it, but I have mono all the time
> I am still not sure - maybe I am doing something stupid, I think
> I try to install old version, patch it and look if it works
>
> --
> No one sees an angel till it smashes to the ground
> And then you run somewhere
> And leave it lying there
> "Magica" - Ronnie James
Dio
>
>
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
