> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steven Ellis > Sent: Friday, 18 July 2003 7:19 AM > To: [EMAIL PROTECTED] > Subject: saa7134 0.2.8 - My images appear softer, and other comments. > > > Just updated from 0.2.7 to 0.2.8 for my saa7134 based > FlyVideo 3000 and the video somehow seems a lot > softer. Anyone else got this. > > Also Audio locking appears to be a bit better, > although I have to specify 5.5MHz range on the module > parameters otherwise I have lots of problems. I'm > based in New Zealand which uses B/G PAL with German > Nicam. >
How are you doing this exactly? I'm in Australia so I have the same setup etc as you. I have noticed similar mono/stereo switching. > Nicam appears to lock a lot better, previously it > wandered between Mono and Stereo a lot. Plus the > overally quality of the image has improved. Until > recently I tended to perform a lot of captures over > composite in from a Nicam VCR source to make sure I > had a solid picture and Stereo Audio. > > Now a couple of minor niggles > > 1 - Can we get a reasonable howto on using PCI based > audio rather than using the sound card input for these > devices. I still haven't got this working myself. > It's pretty simple. Set oss=1 in your module parameters and when the module starts it will take the next /dev/dspx device. From memory use dsp_nr=x as another option to specify a particular /dev/dspx you want to use. CH -- video4linux-list mailing list Unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/video4linux-list
