i got the case open using a t15 bit, and noticed that it had the 2 top screws replaced (unless they are super-shiny and don't match the lower ones from the factory) now i have a new problem, i airdusted alot of the stuff, and had to remove the system board to get the HDD cage out. I replaced the HDD, and (i think) i plugged in everything properly, but now it won't boot, no chime, no screen, the HDD doesn't stay spun up, it just has a fan spinning... Did I forget to plug something in? did i kill the system? Do i have a new boat anchor?
On Wed, Apr 15, 2009 at 6:46 PM, Dark_Mac <[email protected]> wrote: > > All, > > Here is what you need to get Item # 36417 for $6.16 shipping is $8.98 > UPS Ground Continental USA Only - unless you need to buy about > $243.84 other things. > > http://www.wihatools.com/300seri/364serie.htm > > Why make something that might work and most likely damage your system > when you can buy the correct tool for the job. > > Sorry all but why keep something this long just to mess it up by > being just plain stupid. > > Mike > > On Apr 15, 2009, at 2:21 PM, James Fraser wrote: > >> >> >> Hello, >> >> --- On Wed, 4/15/09, d.colvin d.colvin <[email protected]> wrote: >> >>> Does anyone know the bit size. An ounce of prevention. . . >> >> It's a T-15. >> >> I don't have time to look around just now, but *one* of the >> suggestions on this page should get you a T-15 screwdriver: >> >> http://home24.inet.tele.dk/ccadams/se/torx.html >> >> >> Best, >> >> James Fraser >> >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
