Thanks. Now I'm wondering if those are set correctly. This is the only device on the machine. Does anyone know if it's supposed to be terminated and if 0 or 1 would be the correct setting?
Also the device has 2 identicle SCSI ports on it, I assume so you can daisy chain another SCSI device. I'm not doing this so does it matter which port I use? On Apr 27, 11:47 pm, Charles Lenington <[email protected]> wrote: > my guesses > > netBEUI wrote: > > Does anyone have a manual for the DaynaPort SCSI/Link-T model DP0801 > > or know where I can find a PDF? I'm wondering what the > > "0/1" switch > > termination? > > is > > > for as well as the little dial beside it labeled 0 through 9. > > SCSI id? > > > > > I'm having trouble getting my Classic II on line but I want to check > > the manual before asking questions :) > > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is athttp://lowendmac.com/lists/vintagemacs.shtmland our > netiquette guide is athttp://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group > athttp://groups.google.com/group/vintage-macs > > Support for older Macs:http://lowendmac.com/services/ -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
