Thanks Nat I installed a slave 1.6 GB drive in the G3 and the Classic connects to it no problem.
Todd On Sun, Dec 19, 2010 at 11:56 PM, Nat Hall <[email protected]> wrote: > > > On Sun, Dec 19, 2010 at 10:21 AM, [email protected] <[email protected]>wrote: > >> I have a Beige G3 running 9.2.2 networked to a Classic running 6.0.7 >> with PhoneNet type connectors with resistors. I was able to connect to >> the G3 from the Classic but now in Chooser when I try to connect I get >> a " zero divide error" but I can connect to the G3 from an Apple IIGS. >> I have tried using a different Classic and a PowerBook 140 and get the >> same error or a type 4 error. My PRAM battery is a little low on the >> G3 would that cause issues. I was also wondering when working why the >> G3 can never see the older systems but the older systems can connect >> to the G3. Thanks >> >> > > System 6 can't access partitions larger than 2 gigabytes. You'll get this > error on a System 6 Macintosh client trying to access a server with a shared > volume larger than 2 gigs. I'm willing to bet the drive you have shared on > the G3 is over 2 gigs. The only solution is.... to repartition the hard > drive on the G3 so there is at least one partition 2GB or smaller and share > that volume, or use a piece of removable medium (like a ZIP-100 disk) that > is < 2 GB and share it instead. It's really a pretty inconvenient limitation > in today's day and age, IMO. > > The GS version of System 6 doesn't have this limitation, however, which is > why you're able to access the server no problem from there. > > > Nat > > -- > ----- > You received this message because you are a member of the Vintage Macs > group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to > [email protected]<vintage-macs%[email protected]> > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
