On 17 Oct 2011, at 18:07:52 PDT, GuyWithGuitars wrote:
How on Gods green earth do you remove the HDD and FDD from a Color
Classic? Looks to me like it requires a 100% disassembly. What am I
missing?
-----------------
Well, it's a lot like the other Classics. From the hardware take
apart manual:
1 Using a long-handled
Torx screwdriver,
remove the four case
screws. If necessary,
remove the two security
screws from the I/O
door.
2 Using a case spreader
(pull-apart tool),
separate the housing
from the chassis.
Carefully lift the rear
housing and set it aside.
---
Hard Drive
Before you begin,
• Remove the rear housing
• Discharge the CRT
• Remove the anode cap
• Remove the analog board
1 Disconnect the hard
drive data and hard drive
power cables.
2 Push the cables through
the hole in the plastic
chassis.
3 Raise the mounting tab
and pull the hard drive
straight out of the
chassis mounting
channel.
---
Floppy Drive
Before you begin,
• Remove the rear housing
• Discharge the CRT
• Remove the anode cap
• Remove the analog board
• Remove the speaker
1 Disconnect the floppy
drive cable and push it
through the hole in the
plastic chassis.
2 Depress the mounting
tab and pull the floppy
drive straight out of the
chassis mounting
channel.
Ken Daggett
[email protected]
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
