No, it's got new caps. Power supply was never touched. I did disconnect the cd rom, hard drive and the ram. Same result. I even tried ram from our quadra 650 and no difference.
Sent from my iPhone > On Feb 8, 2015, at 4:21 PM, Matt Patoray <[email protected]> wrote: > > You said the board was recapped about a year ago. > > What about the power supply? > > Have you tried reseating the ram SIMMS? > > Also try simplifying you configuration, remove extra RAM, disconnect the SCSI > drives and see if you can get it to boot. If yes the. Start adding components > back starting with the RAM and checking to see if you can boot each time. > > Sent from my iPhone > >> On Feb 8, 2015, at 4:42 PM, Hardware Mack <[email protected]> wrote: >> >> Oh --- Q610 the caps are toast. >> >> Charles >> >> >> Sent from the office of MacCaps.com >> >> MACCAPS.COM >> 22222 ROETHEL DRIVE >> SUITE F >> NOVI, MICHIGAN 48375 >> UNITED STATES >> >> Thanks. >> Charles Phillips >> 248 325 8812 >> >> >> >>> On Feb 8, 2015, at 3:05 PM, Robert Hesson wrote: >>> >>> Went to batteries plus and got a new battery... Still same issue. >>> >>> Sent from my iPhone >>> >>>> On Feb 8, 2015, at 1:38 PM, Clark Martin <[email protected]> wrote: >>>> >>>> Very likely the PRAM battery is dead. >>>> >>>> A simple test and work around is to turn it on, let the drive spin up then >>>> turn the power switch off then quickly back in again. This will typically >>>> allow it to start up normally. If it does then you need a new battery. >>>> >>>> Sent from an iPhone, don't ask whose. >>>> >>>>> On Feb 8, 2015, at 10:37 AM, Robert Hesson <[email protected]> wrote: >>>>> >>>>> I have a quadra 610 and when I turn it on, the drive spins, the keyboard >>>>> lights flash once but it does not "bong" or wake up the screen. It had >>>>> been re-capped a year or so ago and all seems fine on the board. >>>>> >>>>> Anyone ever encounter this issue? I have two kids that want to play you >>>>> don't know jack and work on storybook weaver. >>>> >>>> -- >>>> -- >>>> ----- >>>> You received this message because you are a member of the Vintage Macs >>>> group. >>>> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our >>>> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml >>>> To post to this group, send email to [email protected] >>>> To leave this group, send email to >>>> [email protected] >>>> For more options, visit this group at >>>> http://groups.google.com/group/vintage-macs >>>> >>>> Support for older Macs: http://lowendmac.com/services/ >>>> --- >>>> You received this message because you are subscribed to the Google Groups >>>> "Vintage Macs" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> -- >>> ----- >>> You received this message because you are a member of the Vintage Macs >>> group. >>> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our >>> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml >>> To post to this group, send email to [email protected] >>> To leave this group, send email to [email protected] >>> For more options, visit this group at >>> http://groups.google.com/group/vintage-macs >>> >>> Support for older Macs: http://lowendmac.com/services/ >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "Vintage Macs" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> -- >> ----- >> You received this message because you are a member of the Vintage Macs group. >> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our >> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml >> To post to this group, send email to [email protected] >> To leave this group, send email to [email protected] >> For more options, visit this group at >> http://groups.google.com/group/vintage-macs >> >> Support for older Macs: http://lowendmac.com/services/ >> --- >> You received this message because you are subscribed to the Google Groups >> "Vintage Macs" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > -- > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > --- > You received this message because you are subscribed to the Google Groups > "Vintage Macs" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
